The DG2303 is a high-speed, 1-bit, low power, TTLcompatible bus switch. Using sub-micron CMOS technology, DG2303 achieves low on-resistance and negligible propagation delay.

DescriptionThe LIS302ALB is a miniaturized low-power three-axis linear accelerometer. It includes a sensing element and an IC interface to provide an analog signal to the external world.The sensing element, capable of detecting the acceleration, is manufactured using a dedicated process developed by ST to produce motion sensors and actuators in silicon.process that allows to design a dedicated circuit which is trimmed to better match the sensing element characteristics. The device can be operate

100-240V AC free-voltage input, 48-125V DC type available Short body - 62.5mm 2.461 inch (screw terminal type) Front panel of IP65 type is protected against water-splash and dust Built-in Screw terminals Screw terminal type is used for easy wiring and reducing additional cost for accessories. 0 setting instantaneous output operation Multiple time ranges - 1 s to 500 h (Max.) 8 different operation modes: (PM4H-A) Compliant with UL/CSA, CE and LLOYD

FSA2859 -- Dual-Voltage, 0.8 DPDT Analog Switch with Power-Off Isolation

The DG417L/418L/419L are low voltage pin-for-pin compatible companion devices to the industry standard DG417/418/419 with improved performance. Using BiCMOS wafer fabrication technology allows the DG417L/418L/419L to operate on single and dual supplies. Single supply voltage ranges from 3 to 12 V while dual supply operation is recommended with ± 3 to ± 6 V.

The Intersil ISL54047 device is a low ON-resistance, low voltage, high off-isolation, bidirectional, differential singlepole/ single-throw (SPST) analog switch. It was designed to operate from a single +1.65V to +4.5V supply. Targeted applications include battery powered equipment that benefit from low RON (0.44™) and fast switching speeds (tON = 40ns, tOFF = 35ns). The digital logic input is 1.8V logic-compatible when using a single +3V supply.

DESCRIPTIONThe ADG417 is a monolithic CMOS SPST switch. This switchis designed on an enhanced LC2MOS process that provides lowpower dissipation yet gives high switching speed, low on resis-tance and low leakage currents.The on resistance profile of the ADG417 is very flat over thefull analog input range ensuring excellent linearity and lowdistortion. The part also exhibits high switching speed and highsignal bandwidth. CMOS construction ensures ultralow powerdissipation making the parts ideally

The HT82V842A is a CMOS single-chip signal processing device for CCD area sensors. It consists of a clamp circuit, Correlated Double Sampler (CDS), Programmable Gain Amplifier (PGA), reference voltage generator,

Small package Low ON resistance : Ron = 12 ? (max) (@VGS = ?4 V) : Ron = 32 ? (max) (@VGS = ?2.5 V)

features guaranteed Break Before Make switching, MARKING assuring the switches never short the driver. DIAGRAM The NLAS4685 is available in a 2.0 x 1.5 mm bumped die array, with a 3 x 4 arrangement of solder bumps. The pitch of the solder bumps is 0.5 mm for easy handling. A1 XXD Features Microbump-10 · Ultra-Low RON, t0.8 W at 2.7 V CASE 489AA A1 · Threshold Adjusted to Function with 1.8 V Control at XX = Device Code D = Date Code VCC = 2.7-3.3 V · Single Supply Operation f