RoHS Compliant Bicolor feature allows for multiple indications daylight viewability. Tamperproof Designed for high durability Long life up to 100K hours uniform illumination. Low profile flat lens design.

Features:High output programmable sounder base and sounder One point of installation for detector, isolator, sounder & beaconLoop powered from the MX TechnologyDigital Loop High brightness Multi-LED BeaconSoftware programmable15 Tones and 2 Flash RatesIntegral line isolatorRSM (Reflective Sound Monitoring)Can be used as a standalone device using the sounder blanking capMX AVBase range of devices includes a sounderbeacon base and a high output sounder base for use with MXTechnology fire contr

DescriptionThis board is a general-purpose developmant platform for all applications based on the TS4962M mono class D audio amplifier. The TS4962M is a monolithic fully-differential input/output class D power amplifier. It also includes a common-mode feedback loop that controls the output bias value to average it at VCC/2 for any DC common mode input voltage. This allows the device to always have a maximum output voltage swing, and consequently maximizes the output power. Moreover, as the load

Meets all IEEE 802.3 and ANSI X3.263 standards including 350?H OCL with 8mA bias, IC grade transfer-molded package suitable for reflow soldering temperatures up to 235?C, Applicable with AMD, Kendin Semiconductor and Quality Semiconductor transceivers.

The BG015 is a fully integrated bandgap reference generator generating four temper-atures, power supply independent bandgap-like voltages: VREFN 0.2 V, VREF125 1.2 VTH160 1.64 V, VTH175 1.79 V and VREFP 2.86 V. A 4-bit trimming capability is provided through dcal[3:0] digital inputs. 15 correction steps (7 up and 8 down) are available for readjusting voltages with approximately 0.5% initial accuracy. This accuracy is main-tained by an 80 ppm/°C- temperature coefficient and a 30 mV/V power su

DescriptionThis demonstration board is a Power over power, along with data, to remote devices over a standard twisted-pair cable in an Ethernet network. The power supply fully complies with IEEE 802.3-2005 PoE specifications and delivers the rated output from any compliant source.Outputs of 3.3 V and 12 V are used as examples easily met with minor changes. The IEEE 802.3af specification is intended to greatly simplify the wiring to remote equipment by providing power over the same medium that ca

Baseband-processing architectures in third-generation (3G) base stations need to be flexible enough to accommodate different 3G standards like code-division multiple access (CDMA2000), wideband CDMA (WCDMA), and time division-synchronous CDMA (TD- SCDMA). Since most of the required functionality can be realized digitally using a digital signal processor (DSP), a field programmable gate array (FPGA), or a combination of these parts, wireless designers have many architectural choices. Recent studi

Features PCA2125 / PCF2124 Low Power SPI based RTC Resolution - sec, minutes, hours, weekday, day, month, year Operating voltage 1.2 to 5.5V Low standby current for SuperCap typ 0.25uA at 3.0V for PCF2124 typ 0.55uA at 3.0V for PCA2125 Three-line SPI with separate data I/O Programmable timer / alarm functions with interrupt capability Internal power-on reset 32.768 KHz quartz crystal No other external components required Automotive temp range of -40 to +125 C for PCA2125 P89LPC932A1 8-bit, 2-clo

The PCnet-FAST evaluation kit is a design evaluation vehicle for the Am79C971 PCnet-FAST single-chip Ethernet controller. The kit includes an evaluation board with the Am79C971 Ethernet controller and is designed for 10BASE_T or 100BASE_TX media.