Ultra-high volumetric efficiency, Excellent solderability, Stable temperature and frequency characteristics, Low leakage current, low dissipation factor, Low self-inductance, High resistance to shock and vibration, Suitable for use without series resistor (recommended operating conditions see www.epcos.com/tantalum_gti, section 4.4), Lead-free and material content compatible with RoHS.

The NTE844 is an integrated circuit in a 28-Lead DIP type package and contains all the required circuits functions between the video detector and the picture tube RGB driver stages of a color television receiver. The NTE844 decodes the chrominance signals and then produces three different color signals that are internally combined with the luminance to develop the RGB signals. The picture saturation, hue and brightness DC controls are externally adjustable. The AFPC, ACC, Dynamic flesh control,

The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode.

Operating temperature up to 150 ?C, Outstanding reliability, Very low failure rate, Qualification in compliance with AEC-Q200, High volumetric efficiency, Excellent solderability, Stable temperature and frequency characteristics, Low leakage current, low dissipation factor, Low self-inductance, High resistance to shock and vibration, Suitable for use without series resistor (recommended operating conditions see www.epcos.com/tantalum_gti, section 4.4), Lead-free and material content compatible w

1.6mmX0.8mm SMT LED, 0.75mm THICKNESS, LOW POWER CONSUMPTION, WIDE VIEWING ANGLE, IDEAL FOR BACKLIGHT AND INDICATOR, VARIOUS COLORS AND LENS TYPES AVAILABLE, MOISTURE SENSITIVITY LEVEL : LEVEL 3, PACKAGE: 2000PCS / REEL, RoHS COMPLIANT.

The 15-22 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc.

Highly reliable chip resistor Ruthenium oxide resistive material offers superior resistance to the elements. Electrodes not corroded by soldering Suitable for re-flow soldering. ROHM resistors have approved ISO9001- / ISO/TS 16949- certification.Design and specifications are subject to change without notice. Carefully check the specification sheet before using or ordering it.

Wide variety of low ESR values, High ripple current capability, High volumetric efficiency, Excellent solderability, Stable temperature and frequency characteristics, Low leakage current, low dissipation factor, Low self-inductance, High resistance to shock and vibration, Suitable for use without series resistor (recommended operating conditions see www.epcos.com/tantalum_gti, section 4.4) Lead-free and material content compatible with RoHS.

Description The MC100LVEL38 is a low skew ÷2, ÷4/6 clock generation chip designed explicitly for low skew clock generation applications. The http://onsemi.com internal dividers are synchronous to each other, therefore, the common output edges are all precisely aligned. The device can be driven by either a differential or singleended input signal. The common enable (EN) is synchronous so that the internal dividers will only be enabled/disabled when the internal clock is already in t

The AMD-750 chipset is a highly integrated system logic solution that delivers enhanced performance for the AMD Athlon processor and other AMD Athlon frontside bus-compatible processors. The AMD-750 chipset consists of the AMD-751 system controller in a 492-pin plastic ball-grid array (PBGA) package and the AMD-756 peripheral bus controller.