4-bit magnitude comparator, HEF4585B MSI,HEF4585BP HEF4585BT HEF4585BT HEF4585BU HEC4585BDB HEF4585BD HEF4585BDB HEF4585BPB

Features 14 D SUFFIX CASE 751A · Single or Split Supply Operation 1 · Low Input Bias Current: 25 nA (Typ) · Low Input Offset Current: ±5.0 nA (Typ) · Low Input Offset Voltage PDIP-14 N, P SUFFIX · Input Common Mode Voltage Range to GND CASE 646 · Low Output Saturation Voltage: 130 mV (Typ) @ 4.0 mA 14 · TTL and CMOS Compatible 1 · ESD Clamps on the Inputs Increase Reliability without Affecting Device Operation · NCV Prefix for

The ADCMP565 is an ultrafast voltage comparator fabricated on Analog Devices™ proprietary XFCB process. The device features 300 ps propagation delay with less than 50 ps overdrive dispersion. Overdrive dispersion, a particularly important characteristic of high speed comparators, is a measure of the difference in propagation delay under differing overdrive conditions.

These devices consist of two independent low voltage comparators designed specifically to operate from a single supply over a wide range of voltages. Operation from split power supplies is also possible.

Datasheet;M74HCT688

LM193A/293/A/393/A/2903 Low power dual voltage comparator

There is a another factor which has a significant effect on slew retes-the way in which the AC gain is the rolled off versus frequency.If we refer to figure 7 we see gain gain compensation curves for closed loop gain from 1 to 10,000.Figure 8 relates the slew rate to these frequency response curves.These curves point out one of the tradeoffs between good op amp performance and good copmparators performance.

The TSM109 is a monolithic IC that includes two comparators and a shunt voltage reference. This device offers space and cost savings in many applications including power supply management or data acquisition systems.

DESCRIPTIONThe AD8116 is a high speed 16 16 video crosspoint switchmatrix. It offers a 3 dB signal bandwidth greater than 200 MHzand channel switch times of 60 ns with 0.1% settling. With 70dBof crosstalk and 105 dB of isolation (@ 5 MHz), the AD8116is useful in many high speed applications. The differential gainand differential phase errors of better than 0.01% and 0.01, respectively, along with 0.1 dB flatness out to 60 MHz make theAD8116 ideal for video signal switching.The AD8116 includes ou

Maxwell Technologies 139 consisting of four independent precision voltage comparators, features a greater than 100 krad (Si) total dose tolerance, depending upon space mission. Using Maxwell Technologies radiation- hardened Rad-Pak® packaging technology, the 139 has an offset voltage specification as low as 2 mV max for all four comparators. The 139 was also designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is possi