Flexible contact design for torque forces. Mating guide-in for proper connections. Polarized housing and locking function for environments of shock or vibration. Designed for pick and place mounting. Parts are supplied in tape and reel with 1000 pieces per reel.

Interface connector for mobile phone (cdmaOne). Power supply receptacle, uses pins 1, 8, 15, 16,18 (15, 16 are common). Supports master key specifications or user keygrooves. Includes shield case. Manual solder specifications.

Exceeds IEEE 802.3ab standard for 1000 Base-T. Meets OCL specifications of 350?H Min with 8mADC Bias. Contact Plating: 6?-inch gold flashed. Available with or without LEDs.

DescriptionStraight Cable Plug SolderSuits Cables: RG213Technical DataElectricalImpedance50 OhmMax Frequency1000MHzMechanical & Environmental DataCentre contactSolderOuter ContactSolderMating 5/8" - 24 threaded couplingDurability500 matingsCoupling nut retention100lbs MaxCable Retention40 lbs minTempreture Range-65 to 165 CVibrationMIL-STD-202 Test Cond BSalt SprayMIL-STD-101 Test Cond BThermal ShockMIL-STD-107 Test Cond BMaterial DataPartsMaterialPlatingConnector BodyBrassNickelCentre

Series 5015 is the board to board connector system that supports the IEEE P-1386 standard for mezzanine card installation in industrial computer applications including VME, Futurebus, and other host boards. At 1.0mm pitch, the 64-position connector can be used with standard PCI and S-Bus mezzanine cards in 64 circuit combinations with mated heights of 8-15mm.

Coaxial In-line, TNC or TYPE-N Male and Female, Designed for High speed Operation, Designed to MIL-E-5400 Class II, Long Life.

TTL Interface compatible 13.2 Mbps data rate NRZ signal Directly connectable to demodulation IC. Supply Voltage 3.3V 5V equipment.

Flat cable (from 10 to 64 contacts) can be cut. Accurate cutting only by setting cable to the guide. Cutting knife can be ?xed by clamper from the side and exchanged easily. Safety cover for cutting knife is equipment. The replacement blade of a commercially available box cutter can be used as the cable cutter blade. Compliance with RoHS' Directive Environmentally friendly, the connectors' comply with Europe's RoHS' Directive. Cadmium, lead, mercury, hexavalent, chromium, PBB an

Description Manufacturer Manufacturer Part No. C1, C7, C8 3 Capacitor, 4.7uF, 6.3V, X5R, 0603 Panasonic - ECG ECJ-1VB0J475M C2, C3, C4 3 Capacitor, 1uF, 6.3V, X5R, 0402 Panasonic - ECG ECJ-0EB0J105M C5, C6, C14, C16, C17 5 Capacitor, 0.1uF, 16V, X5R, 0402 Panasonic - ECG ECJ-0EB1C104K D1 1 LED, Green, 0603 Lite-On LTST-C190GKT J1 1 BNC, Amphenol, 75-ohm, edge launch Amphenol 31-6009 J2, J3 2 SMA, 50-ohm, edge launch Johnson Components 142-0701-851 JP2 1 Header, 3x2, 0.1" 3M/ESD 929836-02-36

Features
Cost Performance
Signal lines and shield can be crimped in a batch.
For cellular window-mounted antennas