The AD9776/AD9778/AD9779 are dual, 12-/14-/16-bit, high dynamic range, digital-to-analog converters (DACs) that pro-vide a sample rate of 1 GSPS, permitting multicarrier generation up to the Nyquist frequency. They include features optimized for direct conversion transmit applications, including complex digital modulation, and gain and offset compensation. The DAC outputs are optimized to interface seamlessly with analog quad-rature modulators such as the AD8349. A serial peripheral interface (S

The GBIC-1250A3/A4FS and GBIC-1250B3/B4QS families are compliant with GBIC interface converters specification Rev. 5.4 as well as Gigabit Ethernet standard as specified in IEEE 802.3z. Delta's GBIC transceiver family uses a 20-pin connector to allow hot plug capability. The system designer can make configuration changes or maintenance simply by plugging in different type of converters without removing the power supply from the host system.

DESCRIPTIONThe AD9020 A/D converter is a 10-bit monolithic convertercapable of word rates of 60 MSPS and above. Innovative archi-tecture using 512 input comparators instead of the traditional1024 required by other flash converters reduces input capaci-tance and improves linearity.Encode and outputs are TTL-compatible, making the AD9020an ideal candidate for use in low power systems. An over-flow bit is provided to indicate analog input signals greaterthan +VSENSE .Voltage sense lines are provide

Low drain-source ON resistance : RDS (ON) = 0.56 . (typ.). High forward transfer admittance : |Yfs| = 4.5 S (typ.). Low leakage current : IDSS = 100 µA (max) (VDS = 200 V). Enhancement mode : Vth = 1.5~3.5 V (VDS = 10 V, ID = 1 mA).

Optimized leakage current, Easy to install, Very compact design, Design complies with EN 133200, Optimized for operation under full load, Low weight, UL approval pending.

BORDLINE -M35 / M45 High End Static Converter BOR

The TEL 30 Series is a new range of cost efficient, isolated 30W converters in a shielded metal case with excellent specification. The 10 models in this series feature 2:1 input range with 18-36 or 36-75 VDC. Overload and over voltage protection, under voltage shutdown as well as remote On/Off are features of this converter. Typical applications for the TEL 30 Series converter are communication and networking systems, industrial electronics and distributed power architectures.

Allows ease of connection to the surface mount SXA10 converter,Provides easy means to fully evaluate all product features,Demonstrates a typical design-in.

The AD6644 is a high speed, high performance, monolithic 14-bit analog-to-digital converter (ADC). All necessary functions, including track-and-hold (TH) and reference, are included on-chip to provide a complete conversion solution. The AD6644 provides CMOS-compatible digital outputs. It is the third generation in a wideband ADC family, preceded by the AD9042 (12-bit 41 MSPS) and the AD6640 (12-bit 65 MSPS, IF sampling).

The AP1512/A is a monolithic IC that design for astep-down DC/DC converter, and own the ability ofdriving a 2A (3A for AP1512A) load withoutadditional transistor component. Due to reducingthe number of external component, the boardspace can be saved easily. The external shutdownfunction can be controlled by logic level and thencome into standby mode. The internalcompensation makes feedback control have goodline and load regulation without external design.Regarding protected function, thermal shu