Coil former flame- retardant as per UL 94 V- 0, Recycleable owing to omission of encapsulation and glue, High resonance frequency due to 2- section winding, Low leakage due to closed core shape, High pulse strength, Low whirring noise, Approx. 1 % stray inductance for symmetrical interference suppression.

Designed for use in DC-DC converters where high energy storage combined with low DCR is a requirement, Suitable for auto assembly and compatible with reflow process to 240?C, Useful in battery-powered and low voltage converters, Rugged design features with an extended operating temperature range of -40?C to +85?C.

Height: 11.43mm Max.Footprint: 18.54mm x 15.24mm Max.Current Rating: up to 20A.Inductance Range: 0.68µH to 150µH.260°C reflow peak temperature qualified.Leaded technology compatible.

The CBP1251 series Inductors are wound on "Drum" style ferrite cores and are ideal for use as Input/Output filter Inductors in Switch Mode Power Supplies.

Data Brief;STR91X-SK/KEI;STR7-SK/KEIL;STM32-SK/KEIL

Full support means the Nios II cores meet all functional and timing requirements for the device family and may be used in production designs Preliminary support means the Nios II cores meet all functional requirements, but may still be undergoing timing analysis for the device family; they may be used in production designs with caution.

The CBP1253 series Inductors are wound on "Drum" style ferrite cores and are ideal for use as Input/Output filter Inductors in Switch Mode Power Supplies.

Description The H16550S includes the following six major blocks. All the cores inputs and outputs are fully synchronous to the rising edge of the CLK input. Interface Handles communication with the processor (or parallel) side of the system. Manages all writing and reading of in-ternal registers. Registers Holds all of the devices internal registers. Some informa-tion comes from the other blocks, but it is all gathered in the Registers block and made available to all blocks. RXBlock Handles the

The CBP1255 series Inductors are wound on "Drum" style ferrite cores and are ideal for use as Input/Output filter Inductors in Switch Mode Power Supplies.

The Supply Controller (SUPC) controls the supply voltages of the system. In a typical application, the Supply Controller allows supply of the device directly from a double NiMH or NiCd battery or from a double CR2031 Lithium battery or from any Lithium rechargeable battery.