Output frequency of 10 to 36MHz is available

LOW COST SMD PACKAGE, 1.6 mm THICKNESS, FUNDAMENTAL FREQUENCIES TO 70.00 MHz

The S1612 Series is a 1.8V crystal clock oscillator using less than 20mW. The output clock signal, generated internally with a non-PLL oscillator design, is compatible with JESD8-7 logic levels. The device, available on tape and reel, is contained in a 5x7mm surface-mount ceramic package.

Vectron†s VTD3 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS squarewave, temperature compensated oscillator, operating off either 3.3 or 5.0 volt supply.

Frequency RangeF1.8432 to 200.000 MHz.Stability +- 50 ppm

The ICS84329B-01 is a general purpose, single output high frequency synthesizer and a member of the HiPerClockS™ family of High Performance Clock Solutions from ICS. The VCO operates at afrequency range of 250MHz to 700MHz. The VCOfrequency is programmed in steps equal to the value of the crystal frequency divided by 16. The VCO and output frequencycan be programmed using the serial or parallel nterfaces to the configuration logic. The output can be configured to dividethe VCO frequenc

Description O-CEGM-0XXXXXX-X is based on lower frequency SC-cut OCXO with Low Noise analog multiplier to achieve 1 GHz output frequency Features 1 GHz Very Low Phase Noise Low Spurious +7 dBm Sine Wave output Applications Instrumentation Telecommunication Systems Radar GPS O-CEGM-0XXXXXX-X Low Phase Noise 1 GHz OCXO in 36x27 mm Europack Rev A1.42 (36,1 mm) 1.00 (25,40 mm)0.030 (0,76 mm) TYP0.70 (17,78 mm)120.25 (6,35 mm)30.63 (16 mm)1.07 (27,20 mm)0.20(5,08 mm)7645OVEN-CONTROLLED CRYSTAL OSCILLA

The ICS843031 is a 1 Gigabit Ethernet Clock Generator and a member of the HiPerClocksTM family of high performance devices from ICS. The ICS843031 can synthesize 1 Gigabit Ethernet, SONET, or Serial ATA reference clock frequencies with the appropriate choice of crystal and output divider. The ICS843031 has excellent phase jitter performance and is packaged in a small 8-pin TSSOP, making it ideal for use in systems with limited board space.

SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: AGM9624A DATE: September 6, 2005 Page 1 of 8 AZ DISPLAYS, INC. AGM9624A General Specification Driving IC S6B0724A Intera ies ce With Paraller MPU 8080 Ser ! Display Specification Display Dot Matrix :96*24 Display Mode:Positive/Transflective/FSTN Type Viewing Angle :6:00 Clock Display Duty:1/33 Driving Bias:1/6 Driving Voltage:7.5V Mechanical Characteristics(Unit:mm) o Extenal Dimensi n:27.09* 17.76*1.7 View Area:24.09* 8.26 Dots Size:0.19*0.

Made of high quality synthetic quartz crystal. Available with large size aperture. Design and development on demand.