Current
Three Phase, 200 Volt, 15 To 45 Amp Bridge With Current And Temperature Sensing In A Low Profile Package
This series of MOSFET switches is configured in a 3 phase bridge with a common VDD line, precision series shunt resistor in the source line, and a sensing element to monitor the substrate temperature. This device is ideally suited for Motor Control applications where size, performance, and efficiency are key.
CTP4409 Toroidal Inductors Medium Current
Core type: 1.06" o.d., Iron Powder, perm 75, Power rating: 2.16 watts for temp. rise 50°C, Typical applications: Input and output filters in Switch Mode Power Supplies.
Output VoltageRated Output CurrentPeak Output Curr
Output VoltageRated Output CurrentPeak Output Curr
CTP4556 Toroidal Inductors Medium Current
Core type:1.30" o.d., Moly-Permalloy Powder, perm 60,power rating:3.13 watts for temp. rise 50°C, Typical applications:Switching Inductors in Switch Mode Power Supplies.
Zetex - ZTX951 Silicon planar medium power high current transistor datasheet
PNP SILICON PLANAR MEDIUM POWERHIGH CURRENT TRANSI Very low saturation voltages,Up to 15 amps peak current,4 amps continuous current,Spice model available,Excellent gain characteristics specified up to 10 amps,
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic Output Current of 0.5 A, Three-Terminal Positive Voltage Regulators 5 V, 6 V, 8 V, 9 V, 10 V, 12 V, 15 V, 18 V, 20 V, 24 V
The TA78M--SB series of fixed-voltage monolithic integrated circuit voltage regulators is designed for a wide range of applications. These regulators employ internal current-limiting, thermal-shutdown and safe-area compensation, making them essentially indestructible. One of these regulators can drive up to 0.5 A of output current.
Monolithic 1A Step-Down Regulator with Low Quiescent Current
The ISL97536 is a synchronous, integrated FET 1A step-down regulator with internal compensation. It operates with an input voltage range from 2.5V to 6V, which accommodates supplies of 3.3V, 5V, or a Li-ion battery source. The output can be externally set from 0.8V to VIN with a resistive divider.
NPN SILICON PLANAR MEDIUM POWER HIGH CURRENT TRANSISTOR
25 Volt VCEO. 5 Amps continuous current. Up to 20 Amps peak current. Very low saturation voltage. High Gain. Ptot=1.2 Watts.
200 Series Bulk Metal® Foil Technology Conformally Coated Precision Current Sensing Resistors with TCR of 5 ppm/°C and values down to 5 m?
The VCS200 Series offers resistance values as low as 5 m? and TCR's as low as 5 ppm/°C with excellent long term stability. The resistors are conformally coated. The 4 terminal current sensing resistors can sustain 2 W continuously without an appreciable change in resistance (0.5 % maximum). The typical 50 % derating of the power specification associated with other technologies is not necessary.
GMR Current Sensor Evaluation Kit
The NVE GMR Current Sensor Evaluation Assembly(PN AG003-01) was created to facilitate laboratoryexperimentation and development using GMR currentsensors. The kit consists of four NVE current sensors(PN AA003-02)6 assembled to a printed circuit boardPN AG002-01). The PCB has four trace geometries to simulatevarious PCB current ranges.