Excellent switching times: tr = 0.5 µs (max), tf = 0.3 µs (max).High collector breakdown voltage: VCEO = 400 V.High DC current gain: hFE = 20 (min)

The SMM605 is capable of controlling the DC output of up to six DC/DC Modules, switching regulators or LDOs that use a trim/adjust pin and automatically change the level using a unique Active DC Output Control (ADOCTM). The ADOC function is programmable over a standard 2-wire I2C serial data interface and can be used to set the nominal DC output voltage as well as the margin high and low settings. The part actively controls the programmed set levels to maintain tight control over load variations

The Delphi Series E48SX (XENATM 50), Eighth Brick, 48V input, single output, isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ? Delta Electronics, Inc. The E48SX series provides up to 75 watts of power or 40A of output current (1.2V and below) in an industry standard eighth brick pin-out. With a package size of 50% of the industry-standard quarter brick, preserving the same pin-out and functionality, the E48SX series del

DESCRIPTION:Example: 66- XX-XXBasicModelNumberAttenuationValue (dB)Connector Options1st digit is input side2nd digit is output sideNOTE:1.All dimensions are given in mm (inches) and are maximum, unless otherw ise specified.2.Unit available with RoHS compliant materials, specify when ordering.Nominal ATTN (dB)Deviation (dB)10+2.0020, 30, 40+1.50POWER RATING (mounted horizontally):150 wattsaverage (unidirectional)@ case temperature of -55 C to+100 C maximum. peak(5 sec pulse width;7.5% duty cycle)

The HT45RM03 is 8-bit, high performance, RISC architecture microcontroller devices specifically designed for A/D applications that interface directly to analog signals, such as those from sensors.

The AHE28XXS Series of DC/DC converters feature high power density and an extended temperature range for use in military and industrial applications.

DescriptionThe AAT2785 is a 3-channel 1.8MHz step-down con-verter for applications where power efficiency and solu-tion size are critical. The input voltage range is 2.7V to 5.5V and the outputs are adjustable from 0.6V to VIN.The AAT2785 incorporates a unique low noise architec-ture which reduces ripple and spectral noise. Channel 3 delivers up to 1.5A output current and channels 1 and 2 deliver up to 600mA each. The AAT2785 uses a high switching frequency to minimize the size of external com-p

M/A-COM's MASW-007073-000100 is a GaAs MMIC absorptive SP4T switch with an integral silicon ASIC driver. This device is in a 24-lead plastic package. This switch offers excellent broadband performance and repeatability from DC to 3 GHz, while maintaining low DC power dissipation. The MASW-007073-000100 is ideally suited for wireless infrastructure applications. Also available in a ceramic package with improved performance

The EA049 is a DC Distribution and Alarm Unit designed to interface with Filtronic Comtek Masthead Tower Mount Amplifiers (TMAs). It provides +12Volt to up to six TMAs via external DC Power inserters and the Masthead feeder cables while the window of acceptable operating currents is calibrated to be compatible with the TMAs with which the EA049 is intended to work. LEDs and dry relay contacts indicate the status of each active channel. Output channels are powered if a compatible LNA is connected

The SemiQ Family of dc-dc converters from provides a high efficiency single output in a size that is only 60% of industry-standard quarter-bricks, while preserving the same pinout and functionality.