Including two devices in US6 (ultra super mini type with 6 leads) With built-in bias resistors Simplify circuit design Reduce a quantity of parts and manufacturing process

The ALVC16244 contains sixteen non-inverting buffers with 3-STATE outputs to be employed as a memory and address driver, clock driver, or bus oriented transmitter/receiver. The device is nibble (4-bit) controlled. Each nibble has separate 3-STATE control inputs which can be shorted together for full 16-bit operation.

An actuator driver for digital camera is implemented on a single chip. Supports a constant voltage for the AF H-bridge*2 : a stepping motor (STM) *1.

The DS90LV027AH is a dual LVDS driver device optimized for high data rate and low power applications. The device is designed to support data rates in excess of 600Mbps (300MHz) utilizing Low Voltage Differential Signaling (LVDS) technology. The DS90LV027AH is a current mode driver allowing power dissipation to remain low even at high frequency. In addition, the short circuit fault current is also minimized.

CMPWR280, SmartOR, 3.3V, 1.5A, low dropout regulator, VAUX Drive

The TD62591APG Series are comprised of eight NPN Transistor Arrays. Applications include relay, hammer, lamp and display (LED) drivers. This devices are a product for the Pb free(Sn-Ag).

M/A-COM's MAATCC00011 V3 is a GaAs FET 6-bit digital attenuator with integral TTL driver. Step size is 0.5 dB providing a 31.5 dB total attenuation range. This device is in a PQFN plasic surface mount package. The MAATCC00011 is ideally suited for use where accuracy, fast speed, very low power consumption and low costs are required. For dual supply designs without switching noise, use MAATCC0009.

This board enables the evaluation of the 3.5A switch, High Power white LED driver MIC2299. The board includes components necessary to set the LED current to 20%, 50% and 100% of the nominal LED current (1A). The external inputs also allow this to be programmed either with additional resistors or voltages on the DIM or BRT pins. A load disconnect switch prevents leakage and protects the battery against short circuits while in shutdown mode.

DESCRIPTION:Example: 8312- XX- XBasicModelNumberConnector LocationF = FrontR = RearAttenuationValue (dB)*5305 Spectrum Drive, Frederick, MD 21703-7362 TEL: 301-846-9222, 800-638-2048 Fax: 301-846-9116web: www.aeroflex-weinschel.com email: weinschel-sales@aeroflex.com130Revision Date: 7/8/08Programmable AttenuatorsInput Power RequirementsAC100 to 240 Vac, 50/60 Hz, 50 WattsEnvironmentalOperating Temperature0 to +50 CStorage Temperature:67 to +167 F (-55 to +75 C)Humidity:96%Altitude:40,000'

Including two devices in US6 (ultra super mini type with 6 leads) With built-in bias resistors Simplify circuit design Reduce a quantity of parts and manufacturing process