Dual
FAN7385 Dual-Channel High-Side Gate-Drive IC
The FAN7385 is a monolithic high side gate drive IC designed for high voltage, high speed driving MOSFETs and IGBTs operating up to +600V.
CMOS DUAL 2 WIDE,2 INPUT AND-OR- INVERTER GATES
The 4085B contains a pair of AND-OR-INVERT gates ,each consisting of two 2 input AND gates driving 3-input NOR gate
MIC2584/MIC2585 Dual-Channel Hot Swap Controller/Sequencer
The MIC2584 and MIC2585 are dual-channel positive voltage hot swap controllers designed to facilitate the safe insertion of boards into live system backplanes. The MIC2584 and MIC2585 are available in 16-pin and 24-pin TSSOP packages, respectively. Using a few external discrete components and by controlling the gate drives of external N Channel MOSFET devices, the MIC2584/85 provides inrush current limiting and output voltage slew rate control in harsh, critical power supply environments. Additi
BCM1280 DUAL-CORE 64-BIT MIPS® PROCESSOR WITH SPI-4/HT
The BCM1280 device is a MIPS64 processor core-based system-on-a-chip (SOC) that offers industry-leading performance, high functional integration, and low power levels required by next-generation computing, storage, and networking applications.
BF1205C; Dual N-channel dual gate MOS-FET
TrenchMOS(TM) transistor Logic level FET, BUK9605-30A,BUK9605-30A
SPICE Device Model Si6866BDQ Dual N-Channel 2.5-V (G-S) MOSFET
The attached spice model describes the typical electrical characteristics of the n-channel vertical DMOS. The subcircuit model is extracted and optimized over the ?55 to 125°C temperature ranges under the pulsed 0-V to 5-V gate drive. The saturated output impedance is best fit at the gate bias near the threshold voltage.
MMA6280QT ±1.5 g - 6 g Dual Axis Low-g Micromachined Accelerometer
The MMA6280QT low cost capacitive micromachined accelerometer features signal conditioning, a 1-pole low pass filter, temperature compensation and g-Select which allows for the selection among 4 sensitivities. Zero-g offset full scale span and filter cut-off are factory set and require no external devices. Includes a Sleep Mode that makes it ideal for handheld battery powered electronics
LOW LEAKAGE LOW DRIFT MONOLITHIC DUAL N-CHANNEL JFET
HIGH INPUT IMPEDANCE I G=0.25pA MAX HIGH GAIN gfs=120µmho MIN LOW POWER OPERATION V =2V MAX
1KV ISOLATED 0,6 – 1 W REGULATED DUAL SPLIT OUTPUT SIP7
Input Specifications Voltage range +/- 10 % Filter Capacitors Isolation Specifications Rated voltage 1000 VDC Leakage current 1 mA Resistance 109 Ohm Capacitance 80 pF typ.