Available taped on reel and loose in box, Lead (Pb)-free product, RoHS-compliant product

Ratings to 100W, 125kV, Available with either radial bands or ferrule terminals, Standard models epoxy/enamel coated, additional vinyl heat shrink sleeve available for added protection, Model G is non-inductive, ± 20% tolerance standard, tolerances of ± 15%, ± 10% and ± 5% available, See Models B and T for General Purpose High Voltage Carbon Film Resistors

The vanes of the trimmer are stacked on a sturdy plastic base. The color of the base indicates the maximum capacitance (see Electrical Data Table). The dielectric is a film of polypropylene (PP), polyethylene (PE), polycarbonate (PC), polytetrafluorethylene (PTFE), or polyethyleneterephtalate (PET) which supports the vanes in such a way that good stability is ensured and no microphony can occur.

Compact.RoHS directive compliant.

The CRA04S thick film resistor array is constructed on a high grade ceramic body with convex terminations. A small package enables the design of high density circuits. The single component reduces board space, component counts, and assembly costs.

Specifications subject to change without notice. 4-47 Model L Series MECHANICAL Lead Finish Tin Substrate Material Alumina Resistor Material Cermet Body Material Conformal Epoxy Resin STANDARD RESISTANCE VALUES, OHMS POWER DERATING CURVE -3 Circuit (Isolated Resistors) & -1 Circuits (Bussed Resistors) 100 Ohms Code Ohms Code Ohms Code 80 22 220 820 821 33K 333 60 Percent of 40 27 270 1K 102 39K 393 Rated Power 20 33 330 1.2K 122 47K 473 0 39 390 1.5K 152 51K 513 -0 70 125 150 47 470 1.8K 182

In case of dents of more than 1 mm depth or any other mechanical damage, capacitors must not be used at all. Check tightness of the connections/terminals periodically.The energy stored in capacitors may be lethal. To prevent any chance of shock, discharge and short-circuit the capacitor before handling.?? Failure to follow cautions may result, worst case, in premature failures, bursting and fire

EXTERIOR IS SEALED BY POLYESTER ADHESIVE TAPE AND EPOXY RESIN AT BOTH ENDS TO PROVIDE SUPERIOR MECHANICAL STRENGTH. THE TUBULAR CONFIGURATION CAN PROVIDE HIGH CAPACITANCE, OFFERING A WIDE VARIETY OF APPLICATIONS. AVAILABLE TAPE AND REEL PACKAGE FOR AUTOMATIC INSERTION.

Available taped and loose in box, Lead (Pb)-free productm, RoHS-compliant product

0.25 watt at + 70 °C power rating Dual rated for 0.5 watt, ± 2 % and ± 5 % tolerance, ± 100 ppm/°C and ± 200 ppm/°C temperature coefficient, Tape and reel packaging for automatic insertion (52.4 mm inside tape spacing per EIA- 96-E), Flame retardant epoxy conformal coating, Standard 4 band color code marking for ease of identification after mounting.