DESCRIPTION Low IQ, Low Dropout, 800mA, Source and SinkRegulators Adjustable andFixed 2.5V, 2.85V, 5V OutputThe LT1118 family of low dropout regulators has the unique capability of maintaining output regulation while sourcing or sinking load current. The 2.85V output voltage regulator is ideal for use as a Boulay termination of up to 27 SCSI data lines. The regulator maintains regulation while both sourcing and sinking current, enabling the use of active negation drivers for improved noise immun

RE031 is a Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.5V output voltage, rated for loads up to 5 mA. It is designed to be integrated with other analog cells, digital logic, microcontrollers, DSP cores and memory blocks into system-on-chip products.

The LD1580 is a very low dropout positive linear voltage regulator particularly suitable in applications requiring output currents up to 7 A.

350MHz -3dB BW (AV = 2)1.5mA supply current per amplifierFast enable/disableSingle and dual supply operation, from 5V to 12V

These three terminal positive regulators are supplied in a hermetically sealed metal package whose outline is similar to the industry standard TO-220 plastic package. All protective features are designed into the circuit, including thermal shutdown, current limiting and safe-area control.

The TS7900A series of fixed output negative voltage regulators are intended as complements to the popular TS7800A series device. These negative regulators are available in the same seven-voltage options as the TS7800A devices. Available in fixed output voltage options from -5.0 to -24 volts, these regulators employ current limiting, thermal shutdown, and safe-area compensation--making them remarkably rugged under most operating conditions. With adequate heat sink they can deliver output currents

DescriptionDescriptionDescriptionDescriptionDescription OperationOperationOperationOperationOperationUpon application of input voltage, the time delay begins.The output is de-energized before and during the timedelay. At the end of the time delay, the output relayenergizes and remains energized until input voltage isremoved.Reset: Reset: Reset: Reset: Reset: Removing input voltage resets the time delayand output.TRM02B0107.07.0410 A DPDT or SPDT OutputContacts24 230 V Operation in RangesOctal or

The LD29080 is a high current, high accuracy, low-dropout voltage regulators series. These regulators feature 400mV dropout voltages and very low ground current. Designed for high current loads, these devices also find applications in lower current, extremely low dropout-critical systems, where their tiny dropout voltage and ground current values are important attributes. Typical application are in Power supply switching

The GJ1118 is a low dropout at positive adjustable or fixed-mode regulator with minimum of 0.8A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.3V logic supply. GJ1118 is also well suited for other applications such as VGA cards. GJ1118 is guaranteed to have lower than 1.3V dropout at full load current making it ideal to provide well regulated outputs of 1.25V to