DESCRIPTION The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. The slew rate is typically 9 V/ s with a supply current under 250 A per amplifier. These unity-gain stable amplifiers have a typical gain bandwidthf 4 MHz. The JFET input stage of the OP282/OP482 ensures bias current is typically a few picoamps and below 500 pA over the full temperature range. Offset voltage is under 3 mV for the dual and under 4 mV for the quad. With a

HIGH INPUT IMPEDANCE I G=0.25pA MAX HIGH GAIN gfs=120µmho MIN LOW POWER OPERATION V =2V MAX

The DG183/184/185 are precision dual double-pole, single-throw (DPST) analog switches designed to provide accurate switching of video and audio signals. This series is ideally suited for applications requiring a constant on-resistance over the entire analog range.

NTE133NChannel JFET Silicon TransistorGeneral Purp

ULTRA LOW NOISE en= 3nV/?Hz TYP.LOW LEAKAGE IG = 15pA TYPs.LOW DRIFT |?VGS1-2 /?T|= 5µV/°C max.ULTRA LOW OFFSET VOLTAGE IVGS1-2I= 1mV max.

Electrical Characteristics: Gate-Source Breakdown Voltage V(BR)GSS IG = 1A, VDS = 0 -40 - - V, Gate-Source Cutoff Voltage VGS(off) VDS = 15V, ID = 0.5nA -4 - -10 V.

The OP215 offers the proven JFET-input performance advantages of high speed and low input bias current with the tracking and convenience advantages of a dual op amp configuration.

DescriptionThe TL074, TL074A and TL074B are high-speed JFET input single operational amplifiers. Each of these JFET input operational amplifiers incorporates well matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit.The devices feature high slew rates, low input bias and offset currents, and low offset voltage temperature coefficient.N DIP14(Plastic package)D SO-14(Plastic micropackage)Inverting Input 2 Non-inverting Input 2Non-inverting Input 1 CC V - CC V234856

SINGLE P-CHANNEL JFET SWITCH

The SST421NL/423NL are monolithic dual n-channel JFETs designed to provide very high input impedance for differential amplification and impedance matching. Among its many unique features, this series offers low operating gate current. Pins 4 and 8 on SST421NL/423NL part numbers enable the substrate to be connected to a positive polarity, external bias (VDD) to avoid latchup.