The LA7847 is EW drive and vertical deflection output Ics for high-definition TV and CRT displays in systems that use a bus control system signal-processing IC. This IC can directly drive (including DC component) the deflection yoke from the saw tooth wave output from the bus control system signal-processing IC. Similarly, the diode modulator block can be driven from the parabolic wave output.

The APE8805A is a low dropout, positive linear regu- lator with very low quiescent current. The APE8805A can supply 600mA output current with low dropout voltage at about 600mV. The BP pin with a 10nF bypass capacitor can help reduce the output noise level. The shutdown function can provide remote control for the external signal to decide the on/off state of APE8805A. With a logic high level at SHDN pin, the device is in the on state, and vice versa. The APE8805A regulator is able to operate wit

The TA7267BP is a Bridge Driver for brushed DC Motor Rotation control. Forward Rotation, Reverse Rotation, Stop and Braking operations are available. It's designed for Loading and Reel Motor driver for VCR and Tape Deck, and any other consumer and industrial applications. TA7267BP have Operation Supply Voltage terminal and Motor Driving Supply Voltage terminal independently, therefore Servo control operation is applicable.

The AWT6133 meets the increasing demands for higher efficiency and linearity in CDMA 1XRTT handsets. The PA module is optimized for VREF = +2.85 V, a requirement for compatibility with the Qualcomm® 6000 chipset. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliability, temperature stability, and ruggedness. Selectable bias modes that optimize efficiency for different output power levels, and a shutdown mode with low leakage current, increase

Suitable for CMOS, TTL, and the and the power supply of other digital ICs Internal thermal overload protection Internal short circuit current limiting Maximum output current of 1.0 A Package in the plastic case TPL (PD = 1.8 W)

The FPD750DFN is a packaged depletion mode AlGaAs/InGaAs pseudomorphic High Electron Mobility Transistor (pHEMT). It utilizes a 0.25 µm x 750 µm Schottky barrier Gate, defined by high-resolution stepper-based photolithography. The recessed and offset Gate structure minimizes parasitics to optimize performance, with an epitaxial structure designed for improved linearity over a range of bias conditions and input power levels. The FPD750DFN is available in die form and in other packages.

The LA5312V is a variable divided voltage generator IC for multiple drive of LCD matrix.

The FAN1585A, FAN1585A-1.5, and FAN1585A-1.8 are low dropout three-terminal regulators with 5A output current capability. These devices have been optimized for low voltage applications including VTT bus termination for FC-PGA, where transient response and minimum input voltage are critical. The FAN1585A-1.5 offers fixed 1.5V with 5A current capabilities for AGTL+ bus VTT termination for FCPGA. The FAN1585A is ideal for low voltage microprocessor applications requiring a regulated output from 1.5

DESCRIPTION The UTC KA8602 is the audio power amplifier available for low voltage. The UTC KA8602 supplies differential outputs for maximizing output swing at low voltages. The UTC KA8602does not need coupling capacitors to the speaker. The gain of this amplifier is controlled easily by two external resistors. FEATURES *Wide operating supply voltage: Vcc=2V~16V *Low quiescent supply current( Icc=2.7mA, typ) *Medium output power (POUT=250mW at Vcc=6V, R L=32ohm, THD=10% *Load impedance range: 8~1

TA31194 FN is an orthogonal modulator ic for transmitter applications. This IC has built-in AGC amp with a wide dynamic range .This IC also VCO, enabling mounting area to be reduced .