Diagnostics Grade / Military Style: Connectors sho Datasheet;STBV45

+28V DC systems. Allows the use of 55V high efficiency FET. Increase system reliability through eliminating avalanche FET operation.

Description50 ohm BNC Technical DataSilicone RubberAirproof RingPTFE Insulator Nickel BrassUn-Elasticity PartGold/SilverBe-Cu or Phosphor BronzeElasticity PartSurface PlatingMaterialsMaterials & Surface Plating500 cyclesDurability1500V (Sea Level,50Hzrms)Withstand Voltage 55dB(3GHz)Screening Efficiency 5000MInsulation Resistance 1.35~4GHz Ang. 1.30~4GHz Str. 1mOuter Contact2. 5mCenter ContactContact Resistance20NUn Engagement Force0.07~0.25NmNormal Force 2.25NOuter Contact 0.57NCenter Contac

DESCRIPTION: A two-component epoxy-polyamide coating for spray and brush applications, furnished in a packaged kit and suitable for use under air pollution regulations. Formulated for the protection against solvents and chemicals on interior and exterior surfaces. Type II use for low infrared reflective needs. TYPICAL PROPERTIES: (1). COLORS..,,,,. All Fed.Std 595 Colors (2). SHELF LIFE.. 1 Year From Date of Mfg (3). DRYING TIME: Set-To-Touch: Within 1 Hour Dry Hard: Within 7 Hours (4). Thinner.

The MillimeterWave Reflectometers are used toextend the measurement capabilities of the6200B series Microwave Test Set (MTS) to millimeterwave frequencies. The Model 6255 (Vband)extends the frequency range to cover 50to 75 GHz, and the Model 6256 (W-Band)extends the range to cover 75 to 110 GHz.Millimetric bands are most commonly used inthe communications, radar and electronic warfaremarkets.

Temperature Coefficient of Resistance (TCR): ± 10ppm/?C Maximum4 (- 55?C to + 150?C Ref. @ + 25?C); Through the wiper5; ± 25ppm/?C Load Life Stability: 0.1% Typical DR, 1.0% Maximum DR under Full Rated Power of 0.25 watts @ 85?C for 1,000hrs. Settability: 0.05% Typical; 0.1% Maximum Setting Stability: 0.1% Typical; 0.5% Maximum, DSS Power Rating: 0.25 watts @ + 85?C Resistance Range: 50W to 5KWResistance Tolerance: ± 10%

DescriptionTST-RR-13T-13Tactical Rear Thin Lamp with Housing for RetrofitTST-RR-10T-13Tactical Rear Thin LampDimensions are in inches [mm] FEATURES / BENEFITSSpecially designed for military applicationsConforms to FMVSS 108 and MIL-STD-1179Lamp housing comes in standard olive drab withhard-wired military connectorsfaster on signal to trailing vehicles in stop/turnfunctionLow power consumptionHigh vibration resistanceRobust, impact-resistant designEasy retrofit of existing incandescentDialight Co

The PE83503 is a high-performance monolithic UltraCMOS™prescaler with a fixed divide ratio of 8. Its operating frequencyrange is 1.5 GHz to 3.5 GHz. The PE83503 operates on anominal 3 V supply and draws only 12 mA. It is packaged in asmall 8-lead MSOP and is ideal for microwave PLL synthesissolutions.

Vishay Thin Film resistor networks are designed to be used in either analog or digital circuits. The use of thin film resistive elements within the network allows you to achieve an infinite number of very low noise and high stability circuits for industrial, medical and scientific instrumentation. Vishay Thin Film resistor networks are packaged in molded plastic packages with sizes that are recognized throughout the world. The rugged packaging offers superior environmental protection and consist