descriptions in this document subject to change without notice. 2008 JDS Uniphase Corporation May 2008 30149149 000 0508 PATHTRAKRPM3000.DS.CAB.TM.AE16 QAM constellation and CTC.bmp FeaturesQuickly and easily integrates with current PathTrak systems,including HCU400/1500,HSM-1000 and RPM1000/2000 via field-installable firmware and PathTrakserver,client and WebView server software upgradesMeasures transient noise as short as 1 sOptimized QAM and spectrum analyzer on every port500 kHz to 85 MHz fr

CMD Microcircuits Microprocessor Monitor features precision circuitry for simplified monitoring of microprocessor systems: power supply monitoring, software execution checking, and external override.

The NTE7001 is a monolithic integrated circuit in a 16-Lead DIP type package intended for use in color television receivers.

The HIP6002 provides complete control and protection for a DC-DC converter optimized for high-performance microprocessor applications. It is designed to drive two N-Channel MOSFETs in a synchronous-rectified buck topology. The HIP6002 integrates all of the control, output adjustment, monitoring and protection functions into a single package.

DescriptionOrdering informationThe ZXCT1050 is a wide input range currentmonitor, which operates over a range of inputvoltages from ground up to VCC-2V. As aresult the ZXCT1050 can be used on the highor low side of the load. The ZXCT1050 provides variable gain byusing two external resistors. The first ofwhich sets the transconductance and thesecond setting the overall gain.The very low offset voltage enables a typicalaccuracy of 1% for sense voltages of only 30mV,giving better tolerances for sma

The STV9211 is an I2C Bus controlled RGB preamplifier designed for Monitor applications, able to mix the RGB signals coming from any OSD device. The usual Contrast, Brightness, Drive and Cut-Off (InfraBlack) Controls are provided.

SpecificationsLCD widescreen monitor24" wide WUXGA Picture/Display Display screen type: LCD-IPS Panel Size: 24" / 61.1 cm Optimum Resolution: 1920 x 1200 @ 60Hz Maximum Resolution: 1920 x 1200 60Hz Display colors: 16.7 M Aspect ratio: 16:10 Brightness: 400 cd/m Contrast ratio (typical): 1000 : 1 SmartContrast ratio (dynamic): 3000:1 Wide Color Gamut display: 102% NTSC Color Gamut Viewing angle: 178 (H) / 178 (V), @ C/R > 10 White Chromaticity, 6500K: x 0.313 / y 0.329 Response time

DESCRIPTION The ADM1176 is an integrated hot swap controller that offers digital current and voltage monitoring via an on-chip 12-bit analog-to-digital converter (ADC), communicated through an I2C interface. An internal current sense amplifier measures voltage across the The ADM1176 limits the current through this resistor by control-ling the gate voltage (via the GATE pin) of an external N-channel FET in the power path. The voltage across the sense resistor (and therefore the inrush current) is

DESCRIPTION One local and up to three remote temperature channels The ADT7462 is a flexible systems monitor IC, suitable for use Series resistance cancellation on remote channels in a wide variety of applications. It can monitor temperature in Thermal protection using THERM pins up to three remote locations, as well as its ambient temperature. Up to four PWM fan drive outputs There are up to four PWM outputs. These can be used to control Supports both high and low frequency PWM drives the speed

The NTE855 is an integrated circuit in a 14-Lead DIP type package used to generate an RF TV signal from baseband color-difference and luminance signals. This device contains a chroma subcarrier oscillator, a lead and lag network, a quasi-quadrature suppressed carrier DSB chroma modulator, an RF oscillator and modulator, and an LSTTL compatible clock driver with adjustable duty cycle. The NTE855 may be used as a general-purpose modulator with a variety of video signal generating devices such as v