The TC74ACT521 are advanced high speed CMOS 8 - bit octal digital comparator fabricated with silicon gate and double layer metal wiring Cmos technology. It achives the igh speed operation similar to equivalent Bipolar Schottky TLL while maintaining the CMOS low power dissipation.

The TB62710P, TB62710F and TB62710FN are specifically designed for use as LED and LED display (cathode-common) Constant-current drivers. The constant-current output circuits can be set up using an external resistor (IOUT = ?90 mA max). These ICs are monolithic integrated circuits have been designed using the Bi-CMOS process. The devices consist of an 8-bit shift register, a latch, an ANDgate and constant-current drivers.

Consumption current VCEL=3.8V 2.5µA typ. Consumption current VCEL=2.3V 0.20µA typ. Input current between cells VCEL=3.8V ±0.3µA max. Overcharge detection voltage Type A 4.35V±50mV Overcharge detection delay time CT=0.22µF 1.5s typ. Detection voltage can be changed to accommodate customer needs

The TA8440H is a full?bridge driver for selecting the forward and reverse running of a motor with brushes and is able to control 4 modes of forward, reverse, stop and braking. The motor driving unit and the control unit have a separate power supply line, independently and the TA8440H is also usable as a stepping motor driver.

The TD62101P / F series are high-voltage, high-current darlington drivers comprised of seven NPN darlington pairs.

Microwire BUS interface, Endurance : 1,000,000 erase/write cycles and Data retention : 40 years.

The TC7W34 is high speed CMOS BUFFER fabricated with silicon gate CMOS technology. The internal circuit is composed of 2 stage including buffer output, which enable high noise immunity and stable output. All inputs are equipped with protection circuits against static dichage or transient excess voltage.

4-ch BTL driver, Use of an HSOP28 power package can achieve downsizing of the set., Gain can be controlled by attaching an external resistance.

The TD62593, 4, 7, 8AFNG are comprised of eight NPN Transistor Arrays. Applications include relay, hammer, lamp and display (LED) drivers. This devices are a product for the Pb free(Sn-Ag).

The TC74VHC123A / 221A are high speed CMOS MONOSTABLE MULTIVIBRATOR fabricated with silicon gate C2MOS technology. There are two trigger inputs, A input (Negative edge), and B input (Positive edge). These inputs are valid for a slow rise/fall time signal (tr = tf = 1 s) as they are schmitt trigger inputs. This device may also be triggered by using CLR input (Positive edge). After triggering, the output stays in a MONOSTABLE state for a time per