The LM4570 is a single supply motor driver for improvedsensory experience in mobile phones and other handhelddevices. The LM4570 is capable of driving up to 192mAwhile operating from a 3V supply. Near rail-to-rail outputswing under load ensures sufficient voltage drive for mostDC motors, while the differential output drive allows thevoltage polarity across the motor to be reversed quickly.Reversing the voltage gives the LM4570 the ability to drive amotor both clock-wise and counter clock-wise fr

4 V gate drive. Low drain-source ON-resistance : RDS (ON) = 0.17 . (typ.). High forward transfer admittance : |Yfs| = 4.5 S (typ.). Low leakage current : IDSS = 100 µA (max) (VDS = 100 V). Enhancement mode : Vth = 0.8~2.0 V (VDS = 10 V, ID = 1 mA)

STR91xF is a series of ARM-powered microcontrollers which combines a 16/32-bit ARM966E-S RISC processor core, dual-bank Flash memory, large SRAM for data or code, and a rich peripheral set to form an ideal embedded controller for a wide variety of applications such as point-of-sale terminals, industrial automation, security and surveillance, vending machines, communication gateways, serial protocol conversion, and medical equipment. The ARM966E-S core can perform single-cycle DSP instructions, g

Description_120030616Initial version (9397 750 09507).DefinitionsShort-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. Fordetailed information see the relevant data sheet or data handbook.Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above oneor more of the limiting values may cause permanent damage to the device. These are stress rat

The A3995 is designed to drive two dc motors at currents up to 2.4 A. Capable of drive voltages up to 36 V, the A3995 includes two independent fixed off-time PWM current regulators that operate in either fast or slow decay mode, as determined by the MODE input.

High DC current gain: hFE = 4000 (min) (VCE = 2 V, IC = 150 mA). Low saturation voltage: VCE (sat) = 1.5 V (max) (IC = 1 A, IB = 1 mA).

descriptions relate to Protect IT - MNS Motor Management INSUM, Release 2.3/1. This product has been certified by ABB Group as Industrial IT EnabledTM- Information Level. All productinformation is supplied in interactive electronic format, based on ABB Aspect ObjectTM technology. The Industrial IT commitment from ABB ensures that every enterprise building block is equipped with theintegral tools necessary to install, operate, and maintain it efficiently throughout the product lifecycle. The info

The TB6581H/HG is a high-voltage PWM BLDC motor driver. The product integrates the TB6551F/FG sine-wave controller and the TPD4103AK high-voltage driver in a single package ("2-in-1"). It is designed to change the speed of a BLDC directly motor by using a speed control signal (analog) from a microcontroller.

Self-healing properties, Low dissipation factor, Overpressure disconnection device, Highest safety level P2 to IEC 60252-1 2001-02, High insulation resistance, UL approval C US

BI Motor Potentiometers use a precision potentiometer connected to a DC motor by a gear box and clutch. There are eight potentiometer types and 15 gear ratios available combined with a 10,700 RPM motor.