DescriptionFeaturesFunctional DiagramElectrical Speci cations*, TA = 25 C, Pin = +13 dBmTypical ApplicationsThis HMC-XTB110 is ideal for: Short-Haul / High Capacity Radios Automotive Radar Test & Measurement EquipmentThe HMC-XTB110 is a monolithic X3 Passive Fre-quency Multiplier which utilizes GaAs Shottky Diode technology, and exhibits low conversion loss and high Fo isolation. This wideband X3 multiplier requires no DC power, and is targeted to high volume appli-cations where frequency X3

The HA-2557 is a monolithic, high speed, four quadrant,analog multiplier constructed in Harris' Dielectrically IsolatedHigh Frequency Process. The single-ended current output ofthe HA-2557 has a 130MHz signal bandwidth (RL = 50.).High bandwidth and low distortion make this part an idealcomponent in video systems.

The PLL602-38N is a high performance and low phase noise PECL XO IC chip. It provides phase noise performance as low as "127dBc at 10kHz offset

The ICS503 is a member of the LOCOTM family, the most cost effective way to generate a high-quality, high frequency clock output from a lower frequency crystal or clock input. The name LOCO stands for Low Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked-Loop (PLL) techniques, the device uses a standard fundamental mode, inexpensive crystal to produce output clocks up to 160 MHz.Stored in the chip's ROM is the ability to generate

PhaseLink™s Analog Frequency Multipliers TM(AFMs) are the industry™s first Å“Balanced Oscillatorutilizing analog multiplication of the fundamentalfrequency (at double or quadruple frequency),combined with an attenuation of the fundamental ofthe reference crystal, without using a phase-lockedloop (PLL), in CMOS technology.

The XRT8020 is a monolithic analog phase locked loop that provides a high frequency LVDS clock out- put, using a low frequency crystal or reference clock. It is designed for SONET/SDH and other low jitter ap- plications.The high performance of the IC provides a very low jitter LVDS clock output up to 650 MHz, while operating at 3.3 volts. The XRT8020 has a selectable 8x, 16x or 32x internal multiplier for an external crys- tal or signal source. The Output Enable pin provides a true disconnect fo

The MK1714-01 is a low cost, high performance clock synthesizer with selectable multipliers and percentages of spread spectrum designed to generate high frequency clocks with low EMI. Using analog/digital Phase Locked Loop (PLL) techniques, the device accepts an inexpensive, fundamental mode, parallel resonant crystal or clock input to produce a spread or dithered output. This reduces the EMI amplitude peaks at the odd harmonics by several dB. The OE pin places both outputs into a high impedanc

PhaseLink™s Analog Frequency MultiplierTM (AFM) is the industry™s first ËœBalanced Oscillator™ utilizing analog multiplication of the fundamental frequency (at double or quadruple frequency), combined with an attenuation of the fundamental of the reference crystal, without the use of a phase-locked loop (PLL), in CMOS technology.

The PI6C3614-1 is a Low Power Spread Spectrum Frequency Multiplier and part of the Pericom SSCG-GP family. The part generates one 4x modulated output from a single clock source or a crystal, and is designed to reduce electromagnetic interference (EMI) by spreading the clock

The HMC577LC4B is a x2 active broadband frequency multiplier utilizing GaAs PHEMT technology in a leadless RoHS compliant SMT package. When driven by a +5 dBm signal, the multiplier provides +20 dBm typical output power from 27 to 31 GHz. The Fo and 3Fo isolations are >55 dBc at 29 GHz.