The EVAL-PRAOPAMP-4R/4RU is an evaluation board which accommodates quad op amps in SOIC and TSSOP packages. It is meant to provide the user with multiple choices and extensive flexibility for different applications circuits and configurations.

VAA-FMT1-TR Video/Fiber Optic Converter, ST/Multi-Mode, Kit with Transmitter and RecieverVAA-FMT1-T Video/Fiber Optic Converter, ST/Multi-Mode, TransmitterVAA-FMT1-R Video/Fiber Optic Converter, ST/Multi-Mode, Receiver

features include remote loopback, Digital Diagnostics, and remote software downloads. They improve operational expenses by reducing the need for service truck rolls while enhancing customer support to ensure maximum return on all network investments.OESD modules are available for Ethernet and Fast Ethernet (EM316EFRMAHSH-5) and for Gigabit Ethernet (EM316GRMAHSH-5) applications. They include solutions for dual ber, single ber, self-healing links, and redundant trunk con gurations. These modules

These circuits consist of four independent, high gain, internally frequency compensated operational amplifiers. They operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.

An optocoupler provides insulation safety, electrical noise isolation, and signal transfer between its input and output. The insulation and noise rejection characteristics of the optocoupler are provided by the mechanical package design and insulating materials.

Small Form Factor (SFF) Bi-directional Optical Transceiver Multi-sourced 2x5 Pin Configuration Data Rate: 1.25Gbps SC Connector

description of the parameterconfiguration and commissioning steps can befound in the technical data. This information canbe downloaded from the Internet sitewww.abb.de/stotz-kontakt.Important notesInstallation and commissioning of the device mayonly be carried out by trained electricians. Therelevant standards, directives, regulations andinstructions must be observed when planningand implementing the electrical installation. -Protect the device against moisture, dirt anddamage during transport,

The H22B1, H22B2 and H22B3 consist of a gallium arsenide infrared emitting diode coupled with a silicon photodarlington in a lastic housing. The packaging system is designed to optimize the mechanical resolution, coupling efficiency, ambient light rejection, cost and reliability. The gap in the housing provides a means of interrupting the signal with an opaque material, switching the output from an "ON" to an "OFF" state.

The HFA1145 is a high speed, low power current feedback amplifier built with Intersil's proprietary complementary bipolar UHF-1 process.

Description TSAL6100 is a high efficiency infrared emitting diode in GaAlAs on GaAs technology, molded in clear, blue- grey tinted plastic packages. In comparison with the standard GaAs on GaAs tech- nology these emitters achieve more than 100 % radi- ant power improvement at a similar wavelength. The forward voltages at low current and at high pulse 94 8389 current roughly correspond to the low values of the standard technology. Therefore these emitters are ideally suitable as high performance