NEC's PS9614 and PS9614L are optically coupled isolators containing a GaAIAs LED on the light emitting diode (input) side and a photodiode and a signal procesing circuit on the detector (output) side on one chip. The PS9614 is in a plastic DIP (Dual In-line Package) and the PS9614L is a lead-bending type (Gull-wing) for surface mount.

The DC/DC converter provides fully integrated synchronous buck converter solution for the latest one-cell lithium ion cellular phones. Its input voltage is between 2.7V to 6V, capable of delivering up to 1000mA of output current at 1.5V to 3.6V. The DC/DC converter combines the 2MHz-switching controller with fully integrated passive components needed to deliver the smallest and most efficient converter available today. The high switching frequency minimizes the output capacitance with peak to pe

The LVCH32244A 32-bit buffer/line driver is built using advanced dual metal CMOS technology. This high-speed, low power device offers bus/ backplane interface capability with improved packing density. The device has a flow-through organization for simplifying board layout. The three-state controls operate this device in a Quad-Nibble, Dual-Byte or single 16-bit word mode. All inputs are designed with hysteresis for improved noise margin

The NTE3042 is an optically coupled isolator consisting of a Gallium Arsenide infrared emitting diode and an NPN silicon phototransistor mounted in a standard 6-Lead DIP type package.

Description A 5-15R Duplex B Blank C 6-15R Duplex D L5-15R E L6-15R F 5-20R Duplex H L5-20R J L6-20R K 5-30R L 6-30R M L5-30R N L6-30R P L14-30R Arrange suffix letters in alphabetical order for the five positions listed below. C&C Model # Style Position 1 90709- Outlet Box A A A A A 90715- Outlet Panel A A A A A AC Outlet Panel UPS Output Distribution C&C Powers

The LVT16373 and LVTH16373 contain sixteen non-inverting latches with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. The flip-flops appear transparent to the data when the Latch Enable (LE) is HIGH. When LE is LOW, the data that meets the setup time is latched. Data appears on the bus when the Output Enable (OE) is LOW. When OE is HIGH, the outputs are in a high impedance state.

High speed (tf=100ns typ).· High breakdown voltage (VCBO=1500V).· High reliability (Adoption of HVP process).· Adoption of MBIT process.On-chip damper diode.

The QD48T025033 dual output through-hole mounted DC-DC converter offers unprecedented performance in a quarter brick package by providing two independently regulated high current outputs. This is accomplished by the use of patent pending circuit and packaging techniques to achieve ultra-high efficiency, excellent thermal performance and a very low body profile.

DescriptionOrder codeSupplier12C1 and C122.2 F/50 VElectrolytic capacitor21C210 F/35 VElectrolytic capacitor37C3, C4, C5, C6, C7, C15 and C17100 nF/50 VCeramic capacitor SMD 080544C8, C9, C10 and C11470 nF/16 VCeramic capacitor SMD 08055a2C14 and C1610 nF/50 VCeramic capacitor SMD 08055b1C1310 nF/50 VCeramic capacitor SMD 120661C1822 nF/50 VCeramic capacitor SMD 080571C1910 F/35 VTantal capacitor81C20220 pF/50 VCeramic capacitor SMD 080591C21220 F/25 VElectrolytic capacitor101C22100 F/16 VTantal

DESCRIPTION The reference for the four DACs is derived either internally or from a reference pin. The outputs of all DACs may be updated The ADT75181 combines a 10-bit temperature-to-digital simultaneously using the software LDAC function or the exter- converter, a 10-bit 4-channel ADC, and a quad 8-bit DAC, in a nal LDAC pin. The ADT7518 incorporates a power-on reset 16-lead QSOP package. The part also includes a band gap circuit, which ensures that the DAC output powers up to 0 V temperature s