The DS90C385A is a pin to pin compatible replacement for DS90C383, DS90C383A and DS90C385. The DS90C385A has additional features and improvements making it an ideal replacement for DS90C383, DS90C383A and DS90C385. family of LVDS Transmitters.

The TSL1018 is composed of 18 + 1 channel buffers which are used to buffer the reference voltage for gamma correction in thin film transistor (TFT) liquid crystal displays (LCD).

RoHS Compliant Bicolor feature allows for multiple indications daylight viewability. Tamperproof Designed for high durability Long life up to 100K hours uniform illumination. Low profile flat lens design.

As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes forproduct improvement without prior notice. The performance specification figures indicated are nominal values ofproduction units. There may be some deviations from these values in individual units.

Body components available with any desired pin and socket combination, Contacts float in molding to aid in aligning and in withstanding vibration, Polarization accomplished by reversed pin and socket combination.

DescriptionRelease DateNotes120-2100-B332-01/EN07/00First issue 2000 Rexroth Indramat GmbHCopying this document, giving it to others and the use or communicationof the contents thereof without express authority, are forbidden. Offendersare liable for the payment of damages. All rights are reserved in the eventof the grant of a patent or the registration of a utility model or design (DIN34-1).All rights are reserved with respect to the content of this documentationand the availability of the prod

5mm LED Panel Mount Indicator 5V or 12V Integral R 7845i-GSMINTERNET AND DIGITAL CELLULAR COMMUNICATOR

Single-turn (3851 and 3852), Linear and audio tapers, 3-3/4-turn (3856), Wide resistance range, Minimal depth package, Good resolution.

The APD-256G064A has been designed to offer high brightness and superior viewing aesthetics in a package that is very affordable. This display is ideal for low to medium level information content messages and would be ideal for applications such as arcade games, process control, POS terminals, medical equipment, message centers and ATM machines.

This Optopipe™ is clamped to the inside of the plastic panel. The light pipe is not attached to the PCB at any point but floats in front of it. The splines on the tubular section on the right hand side hold the light pipe in place for the clamping operation. The funnel end faces the light source. The tubular sections fit through the plastic panel. The light emitting surface is textured to diffuse the light passing through it. The light source can be any super-bright 2mm, 3mm, or 5mm LED