BPV23F(L) is a high speed and high sensitive PIN photodiode in a plastic package with a spherical side view lens. The epoxy package itself is an IR filter, spectrally matched to GaAs or GaAs/GaAlAs IR emitters (? p = 950 nm).

PD70-01B/TR10 is high sensitivity, fast switching times, low capacitance, compact size, and lack of mesurable degradation make it suitable for diverse applications, such as TV and appliance remote control, IR sound transmission, video recorders, and measurement and control.

TEMD5120X01 is a high speed and high sensitive PIN photodiode. It is a miniature Surface Mount Device (SMD) including the chip with a 4.4 mm2 sensitive area and an infrared bandpass filter matched to IR Emitters operating at wavelength 870 nm or 950 nm.

The SCA-MA256ESP is a back-illuminated silicon photodiode array module for use in applications where peak sensitivity from 480nm to 800nm is required.

The 35PD300-TO, an InGaAs photodiode with a 300µm-diameter photosensitive region packaged in a TO- 46 header. This device is one of Telcom Devices' most versatile optoelectronic components, with applications in high sensitivity instrumentation, laser back-facet monitoring, and moderate-bit-rate telecomm and datacomm transmission. Planar semiconductor design and dielectric passivation provide superior noise performance. Reliability is assured by hermetic sea

Large area planar silicon photodiode in a œflat window, dual lead TO-8 package. This photodiode is a spectrally modified VTB6061BH with a spectral response closely resembling that of the human eye, making it an ideal choice for photometric calibrations. Its high shunt impedance permits accurate measurement of low illuminations.

Features and Benefits High gain at low bias voltage Low operating (bias) voltage Fast response Low noise Various chip and housing options SMD and T1 through-hole housings Lower cost through plastic packaging RoHS-compliant Applications Range finding Optical communication Analytical instrumentation Epitaxial Silicon Avalanche Photodiodes (APDs) C30737P, C30737G Series - Plastic SMD and T1 Through-Hole Housing Options SENSOR SOLUTIONS DATASHEET www.optoelectronics.PerkinElmer.com Epitaxial Silicon

PD438B is a high speed and sensitive PIN photodiode in a cylindrical side view plastic package. The epoxy package itself is an IR filter, spectrally matched to IR emitter.

BPW46 is a high speed and high sensitive PIN photodiode in a flat side view plastic package. Due to its waterclear epoxy the device is sensitive to visible and infrared radiation. The large active area combined with a flat case gives a high sensitivity at a wide viewing angle.

The SMP550G-X3 is a silicon PIN photodiode which is incorporated in a red plastic package which simultaneously serves as a filter and is also transparent for red to infrared emission. The terminals are solder tabs with 0.1" (2.54mm) spacing. Due to its design the diode can be assembled vertically on PC board.