The AT8xC5111 is a high-performance ROM/OTP version of the 80C51 8-bit microcontroller in low pin count package. The AT8xC5111 retains all the features of the standard 80C51 with 4K Bytes ROM/OTP program memory, 256 bytes of internal RAM, an 8-source, 4-level interrupt system, an on-chip oscillator and two timer/counters. The AT8xC5111 is dedicated for analog interfacing applications. For this, it has a 10-bit, 8 channels A/D converter and a five-channel Programmable Counter Array. In addition,

12.6Æ’"12.6mm Max.(LÆ’"W), 6.9mm Max. Height, In addition to the typical versions of parameters shown here, custom designs are available to meet your exact requirements

General purpose VCXO for Phase Lock Loops (PLL), Clock Recovery, Reference Signal Tracking and Synthesizers.Frequencies up to 50 MHz and tri-state option.

25.6Æ’"18.4mm Max.(LÆ’"W), 30.1mm Max. Height. Inductance range: 4.5mH Rated current range: 2.5A In addition to the standard versions of parameters shown here, custom designs are available to meet your exact requirements.

DESCRIPTION The AD7781 is a complete, low power front-end solution for bridge sensor products, including weigh scales, strain gages, and pressure sensors. It contains a precision, low power, 20-bit sigma-delta ( - ) ADC, an on-chip, low noise programmable gain amplifier (PGA), and an on-chip oscillator. Consuming only 330 A, the AD7781 is particularly suitable for portable or battery-operated products where very low power is required. The AD7781 also has a power-down mode that allows the user to

High Photocurrent Sensitivity.All alloy Constrtuction.

TEMD1000 series are high speed silicon PIN photodiodes molded in SMT package with dome lens. Due to integrated Daylight filter devices are sensitive for IR radiation only. High on axis sensitivity is provided by a viewing angle of ± 15 °.

10.5mm Max. ?, 8.5mm Max. Height, Inductance range: 1.0?H~1.0mH, Rated Current Range: 0.28~9.15A, In addition to the standard versions of inductors shown here, custom inductors are available to meet your exact requirements.

DescriptionsMaximumMinimumMaximumOperating MinimumMax. MovementOperatingReleasePre-TravelPointOver-TravelDifferentialPartForceForceinchesMin./Max.inchesinchesMountingTerminal Dimensionsinches (mm)Number(oz.)(oz.)(mm)inches (mm)(mm)(mm)Hole Type *GPTCLS112.40.500.3940.716/0.7800.2200.050U.S.Screw(10.00)(18.20/19.80)(5.61)(1.27)GPTBLS112.80.500.3940.716/0.7800.2200.007U.S.Screw(10.00)(18.20/19.80)(5.61)(0.20)GPTCLS123.10.700.3150.716/0.7800.1250.040U.S.Screw(8.00)(18.20/19.80)(3.20)(1.02)GPTBLS124

The ISL55100B is a Quad pin driver and window comparator fabricated in a wide voltage CMOS process. It is designed specifically for Test During Burn In (TDBI) applications, where cost, functional density, and power are all at a premium.