Thin Film Flat Chip Resistors combine the proven reliability of the professional products with an advanced level of precision and stability. Therefore they are perfectly suited for applications in the fields of test and measuring equipment together with industrial and medical electronics.

The ADG419 is a monolithic CMOS SPDT switch. This switch is designed on an enhanced LC2MOS process that provides low power dissipation yet gives high switching speed, low on resistance and low leakage currents.

DESCRIPTIONTheZRT062isamonolithicintegratedcircuitprovidinga precise stable reference voltage of 6.17V at 500A.Thecircuitfeaturesakneecurrentof150 Aandoperationoverawiderangeoftemperaturesand currents.TheZRT062isavailableinaSOT223packageforsurfacemountapplications.ThisdeviceoffersatrimfacilitywherebytheoutputvoltagecanbeadjustedasshowninFig.1.Thisfacilityisusedwhencompensatingforsystemerrorsorsettingthereferenceoutputtoaparticularvalue.Whenthetrimfacilityisnotused,thepinshouldbeleftopencircuit.F

Very Sharp Breakdown Characteristics, Very Tight Tolerance on VZ, Ideally Suited for Automated Assembly Processes and Very Low Leakage Current

Precision Reference Voltage: VREF = 2.495 V ± 2% Small Temperature Coefficient: |?VREF| = 46 ppm/°C Adjustable Output Voltage: VREF ? VOUT ? 36 V Low Dynamic Output Impedance: |ZKA| = 0.15 ? (Typ.) Small Flat Package TA76431FR is a new Toshiba shunt regulator. This device's pin assignment is the reverse of that of the TA76431F.

ABSOLUTE MAXIMUM RATINGReverse Current200mAForward Relay, solenoid and motor driving,Lamp driving,Line driving,VCEO ranging from 30 to 120V,Continuous current rating to 2A,Excellent gain characteristics,

The ALD MB203 is a precision +/- 5 ½-digit Digital Voltmeter (DVM) printed circuit board that contains the ALD500R/ALD523D A/D Converter " Display Module Controller chipset. It features direct 2 x 16 Character Display Module interface, calibrated analog input (w/scalable input ranges), and digital circuitry to communicate with PC or other microprocessors. It is designed to be used as a stand-alone, embedded system component in a variety of applications including digital panel meters, custo

The SY55856U is a 2.5GHz, two-channel, fully differential CML (Current Mode Logic) delay line. The device is optimized to adjust the relative delay between two channels, such as clock and data, in 50ps increments. Both inputs may be adjusted in either direction in 7 increments of 50ps, for a total adjustment range of ????????In addition, the clock input maybe inverted through the CINV control pin.

DescriptionOptionAD9826KRS40 C to +85C5.3 mm SSOPRS-28THERMAL CHARACTERISTICSThermal Resistance28-Lead 5.3 mm SSOP JA = 109 C/W JC = 39 C/WABSOLUTE MAXIMUM RATINGS? With RespectParameterToMinMaxUnitVIN, CAPT, CAPBAVSS0.3AVDD + 0.3VDigital InputsAVSS0.3AVDD + 0.3VAVDDAVSS0.5+6.5VDRVDDDRVSS0.5+6.5V AVSSDRVSS0.3+0.3VDigital OutputsDRVSS0.3DRVDD + 0.3VJunction Temperature150CStorage Temperature65+150CLead Temperature300C(10 sec)%Stresses above those listed under Absolute Maximum Ratings may cause pe

The ISL28158 and ISL28258 are micro-power precision operational amplifiers optimized for single supply operation at 5.5V and can operate down to 2.4V. These devices feature an Input Range Enhancement Circuit (IREC) which enables them to maintain CMRR performance for input voltages greater than the positive supply. The input signal is capable of swinging 0.25V above the positive supply and to 100mV below the negative supply with only a slight degradation of the CMRR performance.