DESCRIPTIONDirect operated proportional pressure relief valve as a screw-in cartridge with a thread M22x1,5 for cavity according to ISO 7789.Activated with explosion proof solenoid. Thecartridge body made of steel is zinc coated forcorrosion protection.EEx: in accordance with European standardsEN 50014, EN 50018d: flameproof enclosureGroup II C: (gas group II A, II B)for all applications except miningZone 1: (and 2) explosive mixturespresent intermittentlyEC-type examination certificate:Executio

The MPXV7007G series piezoresistive transducers are state-of-the-art monolithic silicon pressure sensors designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A/D inputs. This transducer combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional to the applied pressure.

Features5.0% Maximum Error Over 0 to 85CIdeally Suited for Microprocessor or Microcontroller-Based SystemsTemperature Compensated Over 40 to +125CThermoplastic (PPS) Surface Mount PackagePatented Silicon Shear Stress Strain GaugeAvailable in Differential and Gauge ConfigurationsORDERING INFORMATIONDevice NamePackage Options Case No.# of PortsPressure TypeDevice MarkingNoneSingleDualGaugeDifferentialAbsoluteSmall Outline PackageMPXV7007GC6U Rails482A MPXV7007 G MPXV7007 GC6T1Tape & Reel482A M

The EPT3100 series is a low cost, high performance, media isolated Pressure Transmitter, designed forthe harsh environment of Autosport applications. The EPT3100 strain gauge sensing element coupled withhigh level output ASIC circuitry, assures excellent accuracy and long term stability, protected within arugged, stainless steel housing.Suitable for the measurement and Data Logging of fuel, water and hydraulic systems,the EPT3100 offers a wide choice of pressure port, pressure range and input /

Low pressure (0~1 ) Easy to use dual in-line package (DIP) Wide 0~60 compensated temperature range Span calibration to 2% for low pressure Zero offset calibration High performance, stable packaged silicon chip Gage and differential pressure configurations

The MPVZ2202 device series is a silicon piezoresistive pressure sensor providing a highly accurate and linear voltage output - directly proportional to the applied pressure. The sensor is a single monolithic silicon diaphragm with the strain gauge and a thin-film resistor network integrated on-chip. The chip is laser trimmed for precise span and offset calibration and temperature compensation. They are designed for use in applications such as pump/motor controllers, robotics, level indicators, m

There are some preliminary concerns regarding the measurement of barometric pressure which directly affect the design considerations for this system. Barometric pressure refers to the air pressure existing at any point within the earth's atmosphere. This pressure can be measured as an absolute pressure, (with reference to absolute vacuum) or can be referenced to some other value or scale. The meteorology and avionics industries traditionally measure the absolute pressure, and then reference

The Freescale MPX4105A series Manifold Absolute Pressure (MAP) sensor for engine control is designed to sense absolute air pressure within the intake manifold. This measurement can be used to compute the amount of fuel required for each cylinder.

With root-extracted output (2 - 100% pressure)2)0.

The Freescale MPXH6300A series sensor integrates on-chip, bipolar op amp circuitry and thin film resistor networks to provide a high output signal and temperature compensation. The small form factor and high reliability of on-chip integration make the Freescale pressure sensor a logical and economical choice for the system designer.