The TISP4A250H3BJ is an asymmetrical bidirectional overvoltage protector. It is designed to limit the peak voltages on the Ring line terminal of the LCAS (Line Card Access Switch) such as Le75181, Le75183 and Le75282. The TISP4A250H3BJ must be connected with bar-indexed terminal 1 to the protective Ground, and terminal 2 to the Ring conductor. The TISP4A250H3BJ voltages are chosen to give adequate LCAS ring line terminal protection for all switch conditions. The most potentially stressful condit

The DO-214AA SIDACtor Ethernet protection series is intended for applications sensitive to load values. Typically, high speed connections require a lower capacitance. CO values are 40% lower than standard devices.SIDACtor devices are used to enable equipment to meet various regultory requirements including GR 1089, ITU K.20, K.21 and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68).

Low I/O capacitance at 10pF at 0V, In-system ESD protection to ±15kV contact discharge, per the IEC 61000-4-2 international standard.

This TISP® device series protects central office, access and customer premise equipment against overvoltages on the telecom line. The TISP4xxxM3LM is available in a wide range of voltages and has a medium current capability. These protectors have been specified mindful of the following standards and recommendations: GR-1089- CORE, FCC Part 68, UL1950, EN 60950, IEC 60950, ITU-T K.20, K.21 and K.45. The TISP4350M3LM meets the FCC Part 68 "B" ringer voltage requirement and survives t

This six-pin surface mount package contains programmable protection devices for both negative and positive voltage references.It is constructed using four SCRs and four gate diodes. The SCRs conduct when a voltage that is more negative than -VREF or more positive than +VREF is pplied to Pin 1 or 3 of the SCR. During conduction, the SCRs appear as a low-resistive path which forces all transients to be shorted to ground. For a diagram of a Battrax application, see Figure 6.49 in Section 6, &quo

PACDN042/43/44/45/46 Transient Voltage Suppressors / ESD Protectors, ESD Protection, PACDN042, PACDN043, PACDN044, PACDN044Y, PACDN044T, PACDN045, PACDN046, PACDN042/043/044/045/046

The TISP7xxxF3 series are 3-point overvoltage protectors designed for protecting against metallic (differential mode) and simultaneous longitudinal (common mode) surges. Each terminal pair has the same voltage limiting values and surge current capability. This terminal pair surge capability ensures that the protector can meet the simultaneous longitudinal surge requirement which is typically twice the metallic surge requirement.

The NTE1635 is a monolithic integrated circuit in an 8-Lead SIP type package designed for use in protecting power amplifiers and speakers in various amplifier and receiver applications.

RJ45 data line protection, 2 sets gold coax protection, EMI/RFI noise filtration, V3 Advanced Surge Technology, 8 outlets, Right angle plug, Protection indicator light, Cord management system, Power blocker, 300.000 equipment warranty, 2 m power cord

Completely sealed and weatherproof construction, Modular in design, allowing for second pair addition to the ground mounting stud, Fail-safe switch grade shorting mechanism, Modular design fits most Network Interface Devices.