The device is a miniature type infrared remote control system receiver which has been developed and designed by utilizing the most updated IC technology. The PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as an IR filter. The demodulated output signal can directly be decoded by a microprocessor.

The CM2021 HDMI Receiver Port Protection and Interface Device is specifically designed for next generation HDMI Host interface protection. An integrated package provides all ESD, level shift and backdrive protection for an HDMI port in a single 38- Pin TSSOP package.

A UART consists of a transmitter, which can transmit serial data via a transmit data (TxD) pin, and a receiver, which can receive serial data via a receive data (RxD) pin. Both transmitter and receiver contain a single shift register that performs parallel-to-serial and serial-to-parallel conversion. Although a UART IC normally contains both the transmitter and receiver, implementing a full-duplex UART with the TPU requires independent receiver and transmitter channels because each TPU channel c

These PIN preamplifiers use an InGaAs PIN with a GaAs IC preamplifier. Package style is a hermetically sealed, epoxyless coaxial package with a multimode fiber pigtail.

features two outputs per channel for high-density distribution amplifier applications, and is equipped with multi-stage transient protection. NV-1672Digital EQTMActive ReceiverDistribution Amplifier HubFeatures 16-channel DigitalEQTM Active Receiver DistributionAmplifier Hub1Per channel fully automatic digital signal distance equalisation1Full motion CCTV video at distances up to 1km when usedwith any passive NVT transceiver or hub11,6km when used with NV-653T active transmitter andCat-2 or Cat-

The TSOP13.SB1- series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the reliable function even in disturbed ambient and the protection against uncontrolled output pulses.

The MAS1017 AM-Receiver chip is a highly sensitive, simple to use AM receiver specially intended to receive time signals in the frequency range from 40 kHz to 100 kHz.

Excellent matching characteristics because of composite type. Manufacturing processes reducible and automatic mounting supported. High capacitance ratio and high quality factor. Capacitance separated in RF and OSC.

features inputs and outputs on opposite sides of the package and two ANDed active-low output enables. 1 Features 20 · Output Drive Capability: 15 LSTTL Loads SOIC-20WB · TTL/NMOS-Compatible Input Levels DW SUFFIX HCT541A CASE 751D · Outputs Directly Interface to CMOS, NMOS and TTL AWLYYWWG · Operating Voltage Range: 4.5 to 5.5 V · Low Input Current: 1mA 1 · In Compliance With the JEDEC Standard No. 7A Requirements 1 · Chip Complexity: 134 FETs or

RF frequency: 240 to 450 MHz (multiplication is used) IF frequency: 80 kHz Operating voltage range: 2.2 to 5.5 V