The MSK 4891 is one of a family of plastic encapsulated modules (PEM) developed specifically for use in military, aerospace and other severe environment applications. The SCR/DIODE configuration and 600 volt/300 amp rating make it ideal for use in high current motor drive and inverter brake applications.

Powerex Silicon Conrolled Rectifiers (SCR) are designed for phase control applications. These are all-diffused,press-pak (Pow-R-Disc) devices employing the field-proven amplifying (di/namic) gate.

Easy mounting, Rugged construction, Replaced the serie 2322 640 7., Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC.

DESCRIPTION The AD7879 is a 12-bit successive approximation analog-to-digital converter (ADC) with a synchronous serial interface and low on-resistance switches for driving 4-wire resistive touch screens. The AD7879 works with a very low power supply (a single 1.6 V to 3.6 V) and features throughput rates of 105 kSPS. The device includes a shutdown mode that reduces its current consumption to less than 6 A. To reduce the effects of noise from LCDs and other sources, the AD7879 contains a preproc

These low capacitance diode arrays with common cathode are multiple discrete isolated junctions fabricated by a planar process and mounted in a PIN package for use as steering diodesprotecting up to eight I/O ports from ESD,EFT or surging by directing them either to the positive side of the power supply line and to ground

The AK4182A is a 4-wire resistive touch screen controller that incorporates a 12-bit 125 kHz sampling SAR type A/D converter.

Powerex Dual SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink.

The Powerex CR3CM Lead-mountPhase Control SCRs are glasspassivatedthyristors for use in lowpower control and rectification.These devices are molded siliconeplastic types.

DescriptionThe STMPE610 is a GPIO (general purpose input/output) port expander able to interface a main digital ASIC via the two-line bidirectional bus (I 2C). A separate GPIO expander is often used in mobile multimedia platforms to solve the problems of the limited amount of GPIOs typically available on the digital engine.The STMPE610 offers great flexibility, as each I/O can be configured as input, output or specific functions. The device has been designed with very low quiescent current and i

The P0130AA is a gate sensitive SCR, packaged in TO-92, used in conjunction of a TN22 A.S.D and of a resistor in electronic starter for fluorescent tubelamps.