The AT25080A/160A/320A/640A provides 8192/16384/32768/65536 bits of serial electrically-erasable programmable read-only memory (EEPROM) organized as 1024/2048/4096/8192 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The AT25080A/160A/320A/640A is available in space-saving 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead MAP, 8-lead Ultra Thin Mini-MAP (MLP 2x3) and 8-lead TSSOP packages.

The HV31 is a low voltage serial to high voltage parallel converter with open outputs. It has been designed especially for use as electrostatic printers.

Description 3 Configuration File 3 Circuit Operation .4 Programming the Device..5 Off-PCB Programming.5 Voltage Level Translation6 Obtaining Code and Programming Tools6 Component Details and BOM..7 References 8 REVISION HISTORY 12/05 Revision 0: Initial Version AN-812 Rev. 0 | Page 3 of 8 CIRCUIT DESCRIPTION The core of this particular SPI boot circuit is the PIC12F629 microcontroller. This Flash-based device is capable of writing to the SPI port using the SCLK, SDIO, and CSB control signals. It

This Application Note describes the configuration required to connect the Atmel ARMbased Synchronous Serial Controller (SSC) to a device with an I2S-compatible serial bus, such as a stereo audio digital-to-analog converter (DAC) or a stereo audio Codec.

The AD9222 is an octal, 12-bit, 40/50/65 MSPS analog-to-digital converter (ADC) with an on-chip sample-and-hold circuit designed for low cost, low power, small size, and ease of use. The product operates at a conversion rate of up to 65 MSPS and is optimized for outstanding dynamic performance and low power in applications where a small package size is critical.

VCCDebounce SelectDB0:DB1Field InputsIP0:IP7LED Ou SLAS642

The GS9000C is a CMOS integrated circuit specifically designed to deserialize SMPTE 259M serial digital signals at data rates to 370Mb/s. The device incorporates a descrambler, serial to parallel convertor, sync processing unit, sync warning unit and automatic standards select circuitry.

The AAT4290 and AAT4291 SmartSwitch products are members of AnalogicTech™s Application Specific Power MOSFETTM (ASPMTM) product family. The AAT4290 and AAT4291 are five and three P-channel MOSFETs, respectively, configured for use as a microprocessor I/O expander. Having independent drain outputs and a common source input, they operate with an input voltage ranging from 1.8V to 5.5V, making them ideal for 2.5V, 3.3V, or 5V systems, as well as systems powered by lithiumion/polymer batteries

The TFDU4100 is an infrared transceiver module compliant with the IrDA standard for serial infrared (SIR) data communication, supporting IrDA speeds up to 115.2 kbit/s. The transceiver module consists of a PIN photodiode, an infrared emitter (IRED), and a low-power analog control IC to provide a total frontend solution in a single package. This SIR transceiver is using the small BabyFace package.

The S-29453A Series is high speed, low power 8K-bit serial E2PROM with a wide operating voltage range. It is organized as 512-word"16-bit. It is capable of sequential read, where addresses are automatically incremented in 16-bit blocks. The instruction code is compatible with the M6M800X1 Series.