Support for 5V/12V dual power supply voltage • Built-in regenerative circuit allows use of reverseconnection.protection diode.• Built-in Hall amplifier with hysteresis (supports core.without auxiliary electrode).• Built-in lockup protection and automatic recovery circuits.• Latch-type lockup detection output (RD) is Low during.rotation and High during stop.• Hall bias pin and start/stop pin allow reduced current drain.in standby mode.

Mounting Hole For #8 Screw High Conductivity Metal Case Any Mounting Position Surge Rating Of 300 Amps Mounting Hole For #8 Screw High Conductivity Metal Case Any Mounting Position Surge Rating Of 300 Amps Case to Terminal Isolation Voltage 2500V UL Recognized File # E165989

Features · Low RDS(on) to Minimize Conduction Losses · Low Capacitance to Minimize Driver Losses · Optimized Gate Charge to Minimize Switching Losses http://onsemi.com · These are Pb-Free Devices V(BR)DSS RDS(on) MAX ID MAX Applications · CPU Power Delivery 30 V 6.0 mW @ 10 V 76 A · DC-DC Converters 9.4 mW @ 4.5 V · Low Side Switching D MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Parameter Symbol Value Unit N-Channel Drain-to-Source Vol

The 74V1T14 is an advanced high-speed CMOS SINGLE SCHMITT INVERTER fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. The internal circuit is composed of 3 stages including buffer output, which provide high noise immunity and stable output.

0.36 INCH DIGIT HEIGHT., LOW CURRENT OPERATION., EXCELLENT CHARACTER APPEARANCE., EASY MOUNTING ON P.C. BOARDS OR SOCKETS., I.C. COMPATIBLE., CATEGORIZED FOR LUMINOUS INTENSITY., MECHANICALLY RUGGED., STANARD : GRAY FACE, WHITE SEGMENT. , RoHS COMPLIANT.

The ELS-505 series is a large 12.7mm (0.5")high seven segment display designed for viewing distances up to 7 meters. These displays provide excellent reliability in bright ambient light. These devices are made with white segments and black surface.

The EXA40 Series, comprising 8 different models is targeted specifically at the telecommunications, industrial electronics, mobile Telecommunications and distributed power markets. The series offers two wide input voltage ranges of 18-36VDC and 36-75VDC. Typical efficiencies are 91% for the 5V output, 88% for the 3.3V, 86% for the 2.75V and 84% for the 1.8V. The series has been designed primarily for Telecommunications applications and complies with ETS 300 386-1 immunity and emission standards

The DG528 is an 8-channel single-ended analog multiplexer designed to connect one of eight inputs to a common output as determined by a 3-bit binary address (A0, A1, A2). DG529, a 4- hannel dual analog multiplexer, is designed to connect one of four differential inputs to a common differential output as determined by its 2-bit binary address (A0, A1) logic.

The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode.

Voltage range 9 - 36 VDC (24 VDC), 18 - 72 VDC (48 VDC) Filter Pi Network Rated voltage 3500 Vdc Leakage current 1 mA Resistance 109 Ohm Capacitance 80 pF typ.