Available either in through-hole or surface-mount packages, the BTA24, BTB24, BTA25, BTA26, BTB26 and T25 triac series is suitable for general purpose mains power AC switching.

High volumetric efficiency, Reduced height, Excellent solderability, Stable temperature and frequency characteristics, Low leakage current, low dissipation factor, Low self-inductance, High resistance to shock and vibration, Suitable for use without series resistor (recommended operating conditions see www.epcos.com/tantalum_gti, section 4.4), Lead-free and material content compatible with RoHS.

Ultra-high volumetric efficiency, Excellent solderability, Stable temperature and frequency characteristics, Low leakage current, low dissipation factor, Low self-inductance, High resistance to shock and vibration, Suitable for use without series resistor (recommended operating conditions see www.epcos.com/tantalum_gti, section 4.4), Lead-free and material content compatible with RoHS.

Ultra-high volumetric efficiency, Excellent solderability, Stable temperature and frequency characteristics Low leakage current, low dissipation factor, Low self-inductance

Description of the software architectureThis chapter describes in detail the software routines that should be implemented inside the STBto support SaTCR LNB. The basic commands need a standard DiSEqC 1HW only. This ensures compatibility with mostof today deployed boxes. Set-up is done in a manual mode as in todays boxes. An innovativeapproach using an RF tone as back channel communication allows a bidirectional communicationbetween the STB and the SaTCR LNB whilst keeping compatibility with DiSE

Output loadsharing, 48VDC Input, Unencapsulated 2.3" x 2.4" x 0.50" pkg, 100°C Baseplate temperature, Trim feature, both rails, Industry standard pin-out, Enable (on/off), Thermal protection, 5.0V/3.3V dual outputs

Absolute Maximum Ratings (Ta = 25oC) Symbol Value Unit Zener Current see Rtable "Characteristics" Power Dissipation Ptot 5001) mW Junction Temperature Tj 175 OC