Terminal
6,5LD18210790screw terminal 14 mm 2Magnetic chokes
6,5LD18210790screw terminal 14 mm 2Magnetic chokes
3AG Screw Terminal Laminated Base Type
APPROVALS:1 356 000 Series (250V) Recognized under the Components Program of Underwriters Laboratories. SPECIFICATIONS: Electrical: Rated for currents up to 15 amperes (units with spring brass clips) or up to 30 amperes (beryllium copper clips). Clips: 356 000 Series: Nickel-plated spring brass. 359 000 Series: Silver-plated beryllium copper. Terminals: 8-32THD screw type. Base: Black phenolic laminate. Mounting Hole: 3AG Block: Reference Dimensions .142"/.147" diameter with .295&q
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic Three Terminal Positive Voltage Regulators 5 V, 5.7 V, 6 V, 7 V, 8 V, 9 V, 10 V, 12 V, 15 V, 18 V, 20 V, 24 V
Suitable for CMOS, TTL, the power supply of the digital ICs Internal thermal overload protection. Internal short circuit current limiting. Maximum output current of 1 A. Packaged in POWER MOLD.
DescriptionThe AS78LXX series are three terminal p
DescriptionThe AS78LXX series are three terminal positive regula-tors designed for a wide variety of applications includinglocal, on-card regulation.This series of regulators are complete with internal currentlimiting, thermal shutdown protection, and safe-area com-pensation which make them virtually immune from outputoverload. If adequate heat sinking are provided, these reg-ulators can deliver output currents up to 100mA. FeaturesOutput Current up to 100mAFixed Output Voltages of 5V, 12V, 15V,
Integrated Circuit Positive 3 Terminal Voltage Regulator, 18V, 100mA
The NTE1906 is a positive 3-terminal voltage regulator in a TO92 type package suitable for numerous applications requiring up to 100mA. This device features thermal shutdown and current limiting making the NTE1906 remarkably rugged. In most applications, no external components are required.
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic Three Terminal Positive Voltage Regulators 5 V, 5.7 V, 6 V, 7 V, 8 V, 9 V, 10 V, 12 V, 15 V, 18 V, 20 V, 24 V
Suitable for CMOS, TTL, the power supply of other digital ICs Internal thermal overload protection Internal short circuit current limiting Maximum output current of 1 A Metal fin (tab) is fully covered with mold resin. (T0-220 NIS package)
Multipin terminal strips F.1 F ContentFor direct m
Multipin terminal strips F.1 F ContentFor direct m BCM8152, Product Brief
Integrated Circuit Positive 3 Terminal Voltage Regulator, 24V, 1.5A
The NTE1924 is a monolithic voltage regulator integrated circuit in a TO3 type package designed for use in applications requiring a well regulated positive output voltage. Outstanding features include full power usage up to 1.5A of load current, internal current limiting, thermal shutdown, and safe area protection on the chip, providing protection of the series pass Darlington, under most operating conditions.
SUM50N03-13LC N-Channel 30-V (D-S) MOSFET With Sense Terminal
TrenchFET Power MOSFET Plus Current Sensing Diode, New Low Thermal Resistance Package.
RFully Solid State2 Terminal In-Line ConnectionAdj
FEATURES2. Output.2.1Type: Solid state2.2Rating: (Blank)-1 amp steady state,(10 amp inrush,50 mA. min.) A-6 amp steady state,(60 amp inrush,200 mA. min.) B-10 amp steady state,(100 amp inrush,225 mA. min.) C-15 amp steady state,(150 amp inrush,250 mA. min.) D-2.5 amp steady state,(50 amp inrush, 150 mA. min.) H-25 amp steady state,(250 amp inrush,500 mA. min.) Maximum plate temperature: 85C Maximum plate temperature: 60C2.3Voltage drop: 1.5 volts typical at rated current2.4External resistance:1