Timer
LM555 Timer (LM555CM, LM555CM,LM555CMX, LM555CM, LM555CMM, Z55,LM555CMMX, LM555CN, LM555CN)
General Description
The LM555 is a highly stable device for generating accurate time delays or oscillation. Additional terminals are provided for triggering or resetting if desired. In the time delay mode of operation, the time is precisely controlled by one external resistor and capacitor. For astable operation as an oscillator, the free running frequency and duty cycle are accurately controlled with two external resistors and one capacitor. The
circuit may be triggered and reset on falling waveforms, and the output circuit can source or sink up to 200mA or drive TTL circuits.
Features
ST72321B 64/44-pin 8-bit MCU with 32 to 60K Flash/ROM, ADC, five timers, SPI, SCI, I2C interface
The ST72F321B Flash and ST72321B ROM devices are members of the ST7 microcontroller family designed for mid-range applications.
STR71xF ARM7TDMITM 32-bit MCU with Flash, USB, CAN 5 timers, ADC, 10 communications interfaces
The STR710 series is a family of ARM-powered 32-bit Microcontrollers with embedded Flash and RAM. It combines the high performance ARM7TDMI CPU with an extensive range of peripheral functions and enhanced I/O capabilities. STR71xF devices have on-chip high-speed single voltage FLASH memory and high-speed RAM. STR710R devices have high-speed RAM but no internal Flash. The STR710 family has an embedded ARM core and is therefore compatible with all ARM tools and software.
ST7 timer PWM duty cycle switch for true 0% or 100% duty cycle
Application Note;General Purpose Products;8-Bit Microcontrollers>St7 - 8-Bit Microcontrollers;AN1078
AVR130: Setup and Use the AVR® Timers 8-bit AVR RISC Microcontoller
This application note describes how to use the different timers of the AVR. The AT90S8535 is used as an example. The intention of this document is to give a general overview of the timers, show their possibilities and explain how to configure them. The code examples will make this clearer and can be used as guidance for other applications.
ST7L15, ST7L19 8-bit MCU for automotive with single voltage Flash/ROM memory, data EEPROM, ADC, 5 timers, SPI
The ST7L1x is a member of the ST7 microcontroller family suitable for automotive applications. All ST7 devices are based on a common industrystandard 8-bit core, featuring an enhanced instruction set. The ST7L1 features Flash memory with byte-bybyte In-Circuit Programming (ICP) and In-Application Programming (IAP) capability.
ELM380 Battery Charger Timer
The ELM380 is an 8 pin integrated circuit that is used to provide very long time interval outputs. It is typically used for enabling the charge circuit in Nickel Cadmium battery chargers, but can be easily adapted for many other applications.
ST72324B 5V RANGE 8-BIT MCU WITH 8 TO 32K FLASH/ROM, 10-BIT ADC, 4 TIMERS, SPI, SCI INTERFACE
The ST72F324B and ST72324B devices are members of the ST7 microcontroller family designed for the 5V operating range.
STR750Fxx STR751Fxx STR752Fxx STR755Fxx ARM7TDMI-STM 32-bit MCU with Flash, SMI, 3 std 16-bit timers, PWM timer, fast 10-bit ADC, I2C, UART, SSP, USB and CAN
The STR750 family of 32-bit microcontrollers combines the industry-standard ARM7TDMI 32-bit RISC core, featuring high performance, very low power, and very dense code, with a comprehensive set of peripherals and ST's latest 0.18? embedded Flash technology. The STR750 family comprises a range of devices integrating a common set of peripherals as well as USB, CAN and some key innovations like clock failure detection and an advanced motor control timer. It supports both 3.3V and 5V, and it is a
ST7LITE1xB 8-BIT MCU WITH SINGLE VOLTAGE FLASH MEMORY, DATA EEPROM, ADC, 5 TIMERS, SPI
The ST7LITE1xB is a member of the ST7 microcontroller family. All ST7 devices are based on a common industry-standard 8-bit core, featuring an enhanced instruction set. The ST7LITE1xB features FLASH memory with byte-by-byte In-Circuit Programming (ICP) and In- Application Programming (IAP) capability.