Designed for Complementary Use with the TIP41 Series, 65 W at 25°C Case Temperature, 6 A Continuous Collector Current, 10 A Peak Collector Current, Customer-Specified Selections Available.

Specifications are subject to change without notice.Designed for Complementary Use with the TIP33 Series80 W at 25C Case Temperature10 A Continuous Collector Current15 A Peak Collector Currentabsolute maximum ratings at 25C case temperature (unless otherwise noted)NOTES:1.This value applies for tp 0.3 ms, duty cycle 10%.2.Derate linearly to 150C case temperature at the rate of 0.64 W/C.3.Derate linearly to 150C free air temperature at the rate of 28 mW/C.4.This rating is based on the capability

Specifications are subject to change without notice.Rugged Triple-Diffused Planar Construction4 A Continuous Collector CurrentOperating Characteristics Fully Guaranteed at 100C1200 Volt Blocking Capability75 W at 25C Case Temperatureabsolute maximum ratings at 25C case temperature (unless otherwise noted)NOTE1:This value applies for tp 10 ms, duty cycle 2%.RATINGSYMBOLVALUEUNITCollector-base voltage (IE = 0)TIPL760BTIPL760C VCBO11001200 VCollector-emitter voltage (VBE = 0)TIPL760C VCES11001200 V

The TIP120, TIP121 and TIP122 are silicon Epitaxial-Base NPN power transistors in monolithic Darlington configuration mounted in Jedec TO-220 plastic package. They are intented for use in power linear and switching applications. The complementary PNP types are TIP125, TIP126 and TIP127, respectively.

DescriptionConnectionsTape & ReelConnectionsConnectionsConnectionsConnectionsConnectionsConnectionsbulk length=bulk length=bulk length=bulk length=bulk length=bulk length=bulk length=6mm0.53.2mm0.43.5mm0.54mm0.55mm0.59mm0.525mm1(0.2360.020)(0.1260.016)(0.1380.020)(0.1570.020)(0.1970.020)(0.3540.020)(0.9840.039)250VTip & Ring -250V-400ms200ms/div 1.6s 0-48VTIP & RING GRAPHSCHEMATIC DRAWING6+0/-1(0.236 )+0/-0.03915 0.4(0.591 0.016)0.8 (0.031)0.2 min(0.008) minLengthHeightMOQ = PRIMARY

Collector Base Voltage, Collector Emitter Voltage, Emitter Base Voltage, Collector Current, Collector Peak Current (Repetitive), Base Current, Power Dissipation @ Tc=25ºC, Operating & Storage Junction, Temperature Range

Designed for Complementary Use with TIP120, TIP121 and TIP122, 65 W at 25°C Case Temperature, 5 A Continuous Collector Current, Minimum hFE of 1000 at 3 V, 3 A.

40 W at 25°C Case Temperature, 1 A Continuous Collector Current, 2 A Peak Collector Current, 20 mJ Reverse-Energy Rating.

Specifications are subject to change without notice.20 W Pulsed Power Dissipation100 V Capability2 A Continuous Collector Current4 A Peak Collector CurrentCustomer-Specified Selections Availableabsolute maximum ratings at 25C case temperature (unless otherwise noted)NOTES:1.This value applies for tp 0.3 ms, duty cycle 10%.2.Derate linearly to 150C case temperature at the rate of 6.4 mW/C.3.V CE = 20 V, IC = 1 A, tp = 10 ms, duty cycle 2%.RATINGSYMBOLVALUEUNITCollector-base voltage (IE = 0)TIPP32

DescriptionThe devices are manufactured in planar technology with base island layout and monolithic Darlington configuration. The resulting transistors show exceptional high gain performance coupled with very low saturation voltage.Figure 1.Internal schematic diagramsTO-220 123NPN: R1= 7 KPNP: R1= 16 KR2= 60 R2= 70 Table 1.Device summaryOrder codesMarkingPackagePackagingTIP120TIP120TO-220TubeTIP121TIP121TIP122TIP122TIP125TIP125TIP126TIP126TIP127TIP127www.st.comContentTIP120, TIP121, TIP122, TIP1