The LM393 series consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0§† max. for two comparators which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.

Plastic Package has Underwriters Laboratory Flammability Classification 94V-0 Metal silicon junction, majority carrier conduction Guard ring for overvoltage protection Low power loss, high efficiency High current capability, Low forward voltage drop High surge capability For use in low voltage, high frequency inverters, ree wheeling, and polarity protection applications High temperature soldering guaranteed : 250?/10 seconds at terminals, 0.375" (9.5mm) lead length, 5lbs. (2.3Kg) tension.

Features · 225 mW Rating on FR-4 or FR-5 Board · Zener Breakdown Voltage Range - 2.4 V to 75 V MARKING · Package Designed for Optimal Automated Board Assembly DIAGRAM · Small Package Size for High Density Applications · ESD Rating of Class 3 (>16 KV) per Human Body Model 3 SOT-23 xxx M G · Tight Tolerance Series Available (See Page 4) 1 CASE 318 G · Pb-Free Packages are Available 2 STYLE 8 1 Mechanical Characteristics CASE: Voidfree, transfermo

DESCRIPTIONTRUTHTABLEABSOLUTEMAXIMUMRATINGSAbsoluteMaximumRatingarethosevaluebeyondwhichdamagetothedevicemayoccur.Functionaloperationundertheseconditionisnotimplied1)I Oabsolutemaximumratingmustbeobserved2)V O<GND,V O >V CCPINNSYMBOLNAMEANDFUNCTION11ADataInput21BDataInput3GNDGround(0V)41YDataOutput 5V CCPositiveSupplyVoltageABY LLLLHH HLH HHHSymbolParameterValueUnit V CCSupplyVoltage-0.5to+7.0V VIDCInputVoltage-0.5to+7.0V VODCOutputVoltage(V CC=0V)-0.5to+7.0V VODCOutputVoltage(HighorLowSta

The LD2979 series are very Low Drop regulators available in SOT23-5L and TO-92.

The KA278RXXC is a low-dropout voltage regulator suitable for various electronic equipments. It provides constant voltage power source with TO-220-4 lead full mold package. The dropout voltage of KA278RXXC is below 0.5V in full rated current(2A). This regulator has various functions such as a peak current protection, a thermal shut down, an overvoltage protection.

The Am29SL800D is an 8 Mbit, 1.8 V volt-only Flash-memory organized as 1,048,576 bytes or 524,288 words. The device is offered in 48-pin TSOP and 48- ball FBGA packages. The word-wide data (x16) appears on DQ15"DQ0; the byte-wide (x8) data appears on DQ7"DQ0. This device is designed to be programmed and erased in-system with a single 1.8 volt VCC supply. No VPP is for write or erase operations. The device can also be programmed in standard EPROM programmers.

Plastic package has Underwriters Laboratories Flammability Classification 94V-0.Low forward voltage.High current capability.Low leakage current. High surge capability.Low cost.

The MIC2779 is a voltage monitor-uniquely designed to detect two separate voltage thresholds-combined with a delay generator and logic. It is designed for monitoring the battery supply of portable digital systems, particularly PDAs, pagers, and cellular telephones.

The OSRAM 93591 is mainly used for studio, film and theatre.