The Am29PL160C is a 16 Mbit, 3.0 Volt-only Page mode Flash memory device organized as 2,097,152 bytes or 1,048,576 words.The device is offered in a 44-pin SO or a 48-pin TSOP package. The word-wide data (x16) appears on DQ15"DQ0; the byte-wide (x8) data appears on DQ7"DQ0. This device can be programmed in-system or with in standard EPROM programmers. A 12.0 V VPP or 5.0 VCC are not required for write or erase operations.

The AMD-8151TM HyperTransportTM AGP3.0 Graphics Tunnel (referred to as the IC in this document) is a HyperTransport technology (referred to as link in this document) tunnel developed by AMD that provides an AGP 3.0 compliant (8x transfer rate) bridge.

features and performance for the most demanding UGS NX userworking with challenging design and engineering projects, while boosting productivitythroughout the The combination of UGS NX and ATI FireGL unleashes design creativity, resulting in better,more attractive, more marketable products in a fraction of the time. With full Shader Model 3.0 support accelerated in hardware, a scalable ultra-threaded architecture with true 128-bit floating point precision, parallel geometry engines and pixel sha

The S29PL27H/S29PL129H are 128 Mbit, 3.0 volt-only Page Mode and Simultaneous Read/Write Flash memory devices organized as 8 Mwords. The wordwide data (x16) appears on DQ15-DQ0. The devices can be programmed insystem or in standard EPROM programmers. A 12.0 V VPP is not required for write or erase operations.

features require advanced or additional hardware. See www.microsoft.com/windowsvista/getready/hardwarereqs.mspx and www.microsoft.com/windowsvista/getready/capable.mspx for details. Windows Vista Upgrade Advisor can help you determine which features of Windows Vista will run on your computer. To download the tool, visit www.windowsvista.com/upgradeadvisor. 2 This system requires a separately purchased 64-bit operating system and 64-bit software products to take advantage of the 64-bit processing

The Am29DL400B is an 4 Mbit, 3.0 volt-only flash memory device, organized as 262,144 words or 524,288 bytes. The device is offered in 44-pin SO and 48-pin TSOP packages. The word-wide (x16) data appears on DQ0"DQ15; the byte-wide (x8) data appears on DQ0"DQ7. This device requires only a single 3.0 volt VCC supply to perform read, program, and erase operations. A standard EPROM programmer can also be used to program and erase the device.

This application note describes methodologies for measuring processor-die temperature in desktop and mobile systems using AMD Athlon and AMD Duron PGA processors. Separate chapters describe the methodology for the following situations: Processor has an on-die thermal diode but the motherboard has no temperature sensor Processor has an on-die thermal diode and the motherboard has a temperature sensor Measuring die temperature indirectly on a desktop processor without an on-die thermal diode Mea

feature AutoDetect technology which automatically identi es when youve switched to a new application. Your system can automatically update driver settings to con gure them for ideal performance on the new application helping you get maximum productivity for the exact application youre using at the moment.Advanced Visual CapabilitiesATI FirePro V8750 enables advanced visualization solutions by supporting the ATI FirePro S400 Synchronization Module to provide frame lock/genlock capabilities.ATI Fi

The Am29BDS320G is a 32 Mbit, 1.8 Volt-only, simultaneous Read/Write, Burst Mode Flash memory device, organized as 2,097,152 words of 16 bits each. This device uses a single VCC of 1.65 to 1.95 V to read, program, and erase the memory array. The device supports Enhanced VIO to offer up to 3V compatible inputs and outputs. A 12.0-volt VID may be used for faster program performance if desired. The device can also be programmed in standard EPROM programmers.