The AMIS-710254-A6 (PI254MC-A6-R) is a contact imaging sensor (CIS) module. It operates from a single 5V supply. The module contains of 13 image sensor chips (AMIS-720233 (PI3033) sensor chips). The AMIS-720233 is a 200 dots per inch (dpi) solid-state line imaging array, also a product of AMI Semiconductor. This imaging device is fabricated using MOS imaging sensor technology for its high-speed performance and high sensitivity.

The AMIS-710214 (PI214MC-DR) is a contact image sensor (CIS) module with an additional on-board circuit that digitizes the analog pixels from the CIS image sensor to a Å“background-tracking, two-level digital output signal. It is based on AMI Semiconductor™s CIS module that employs MOS image sensor technology to gain its high-speed performance and high sensitivity. The AMIS-710214 is suitable for scanning documents with width of 216mm and with resolution of 8 dots per millimeter (dpm)

The AMIS-42665 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12V and 24V systems. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller.

The N08L1618C2A is an integrated memory device containing a 8 Mbit Static Random Access Memory organized as 524,288 words by 16 bits. The device is designed and fabricated using AMI Semiconductor™s advanced CMOS technology to provide both high-speed performance and ultra-low power. The device operates with two chip enable (CE1 and CE2) controls and output enable (OE) to allow for easy memory expansion.

The AMIS-30663 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12V and 24V systems. The digital interface level is powered from a 3.3V supply providing true I/O voltage levels for 3.3V CAN controllers.

he AMIS-74980x is a wide dynamic range family of ambient light sensors (ALS) with an analog or digital output. There are several versions of the ALS with analog output; one with 10uA current output at 1000lux all the way to 1mA at 1000lux. The digital output version has a built-in 16-bit ADC with a 2-wire SMBus or I2 C digital interface. The sensor employs AMI Semiconductor™s proprietary CMOS image sensing technology which provides low noise and high dynamic range output signals and a

DESCRIPTION AND PURPOSE: This is the Final PCN to IPCN 15533 located at www.onsemi.com announcing a change in lead frame and clip design for the listed performing a manufacturing change for all SMB CASE 403C packages (JEDEC DO-214AA) used for 100 Amp Thyristor Surge Protection Devices (TSPD). This manufacturing change will effect clip and lead fame designs internal to the package construction. Device performance and reliability have not changed. There will be no changes to package dimensions, fu

AMI Semiconductor™s AMIS-720341-A (PI3041A) contact image sensor (CIS) chip is a 300 dots per inch (dpi) resolution, linear array image sensor chip. The sensor chip is processed using a CMOS image sensing technology and it belongs to the Image Sensor Product Line (ISPL) group within AMIS. Designed for cascading multiple chips in a series, the image sensor chips use a chip-on-board process. They are bonded end-to-end on a printed circuit board (PCB). This bonding process allows the CIS m

The AMIS-710256-A6 (PI256MC-A6-R) is a two-color contact imaging sensor (CIS) module. The module can operate from a single 5V supply. It has two +5V inputs. One supply is for both LED light sources and the other is for the module™s circuit. The module contains 13 sequentially cascaded AMIS-720233 (PI3033) sensor chips. The AMIS-720233 is a 200 dots per inch (dpi) solid-state line imaging array, also a product of AMI Semiconductor. This imaging device is fabricated using MOS imaging sens

The AMIS-710216 (PI216MC-DR) is a contact image sensor (CIS) module with an additional on board circuit that digitizes the analog pixels from the CIS image sensor to a œbackground-tracking, two-level digital output signal. It is based on CIS module, the AMIS-710209-A6 (PI209M-A6) manufactured by AMIS, but with a shorter read length of 88mm. Hence, its performance is equivalent to the AMIS-710209-A6 which uses MOS image sensor technology to gain its high-speed performance and high sensitivit