The N08L1618C2A is an integrated memory device containing a 8 Mbit Static Random Access Memory organized as 524,288 words by 16 bits. The device is designed and fabricated using AMI Semiconductor™s advanced CMOS technology to provide both high-speed performance and ultra-low power. The device operates with two chip enable (CE1 and CE2) controls and output enable (OE) to allow for easy memory expansion.

The AMIS-30663 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12V and 24V systems. The digital interface level is powered from a 3.3V supply providing true I/O voltage levels for 3.3V CAN controllers.

The N01L083WC2A is an integrated memory device containing a 1 Mbit Static Random Access Memory organized as 131,072 words by 8 bits. The device is designed and fabricated using AMI Semiconductor™s advanced CMOS technology to provide both high-speed performance and ultra-low power. The device operates with two chip enable (CE1 and CE2) controls and output enable (OE) to allow for easy memory expansion.

The AMIS-720233-B (PI3033B) contact image sensor (CIS) chip is a 200 dot per inch (dpi) resolution, linear array image sensor chip. The sensor chip is processed with AMI Semiconductor™s proprietary CMOS image sensing technology. Designed for cascading multiple chips in a series, the image sensor chips, using chip-on-board process, are bonded end-to-end on a printed circuit board (PCB) in varying sensing array lengths. This CIS chip offers image reading widths to suit document scan

The AMIS-710256-A6 (PI256MC-A6-R) is a two-color contact imaging sensor (CIS) module. The module can operate from a single 5V supply. It has two +5V inputs. One supply is for both LED light sources and the other is for the module™s circuit. The module contains 13 sequentially cascaded AMIS-720233 (PI3033) sensor chips. The AMIS-720233 is a 200 dots per inch (dpi) solid-state line imaging array, also a product of AMI Semiconductor. This imaging device is fabricated using MOS imaging sens

The AMIS-710216 (PI216MC-DR) is a contact image sensor (CIS) module with an additional on board circuit that digitizes the analog pixels from the CIS image sensor to a œbackground-tracking, two-level digital output signal. It is based on CIS module, the AMIS-710209-A6 (PI209M-A6) manufactured by AMIS, but with a shorter read length of 88mm. Hence, its performance is equivalent to the AMIS-710209-A6 which uses MOS image sensor technology to gain its high-speed performance and high sensitivit

The AMIS-52000 is a low cost, ultra low power ASK/OOK (Amplitude Shift Keying/On-Off Shift Keying) transceiver intended for narrow band RF applications. The device is targeted for applications at 433MHz but can operate from 260 to 700MHz

The N04L1630C2B is an integrated memory device containing a 4 Mbit Static Random Access Memory organized as 262,144 words by 16 bits. The device is designed and fabricated using AMI Semiconductor™s advanced CMOS technology to provide both high-speed performance and ultra-low power.

The AMIS-30585 is a half duplex S-FSK modem and is dedicated for the data transmission on low- or medium-voltage power lines. The device offers complete handling of the protocol layers from the physical up to the MAC. AMIS-30585 complies with the EN 50065 CENELEC, IEC 1334-4-32 and the IEC 1334-5-1 standards. It operates from a single 3.3V power supply and is interfaced to the power line by an external power driver and transformer. An internal PLL is locked to the mains frequency (50Hz or 60H