AMI SEMICONDUCTOR
400dpi CIS Module
The AMIS-710400-A4 (PI400M-A4) is a contact image sensor (CIS) module. It is a long contact image sensor, using MOS image sensor technology for high-speed performance and high sensitivity. The AMIS-710400-A4 is suitable for scanning A4 size (216mm) documents with 15.7 dots per millimeter (dpm) resolution. Applications include document scanning, mark readers, gaming and office automation equipment.
200dpi CIS Module
The AMIS-710208-A7 (PI208MC-A7) is a contact image sensor (CIS) module containing contact image sensors, using MOS image sensor technology for high-speed performance and high sensitivity. The AMIS-710208-A7 is designed to scan documents with a short read length of 88mm. The module produces a single stream of sampled analog video proportional to images of a single horizontal line scan that is stepped vertically down a document page with a resolution of 8 dots per millimeter (dpm) and a w
AMIS-42770 Dual High-Speed CAN Transceiver
Controller Area Network (CAN) is a serial communication protocol, which supports distributed real-time control and multiplexing with high safety level. Typical applications of CAN-based networks can be found in automotive and industrial environments. The AMIS-42770 Dual-CAN transceiver is the interface between up to two physical bus lines and the protocol controller and will be used for serial data interchange between different electronic units at more than one bus line. It can be used for both
4Mb Ultra-Low Power Asynchronous CMOS SRAM
The N04L163WC2A is an integrated memory device containing a 4 Mbit Static Random Access Memory organized as 262,144 words by 16 bits. The device is designed and fabricated using AMI Semiconductor™s advanced CMOS technology to provide both high-speed performance and ultra-low power
AMIS-30521 Micro-stepping Motor Driver Data Sheet
Description Table 2: Pin List and Description Name Pin Description DO 31 SPI data output VDD 32 Logic Supply Input (needs external decoupling capacitor) GND 1 Ground, heat sink DI 2 SPI data in CLK 3 SPI clock input NXT 4 Next micro-step input DIR 5 Direction input ERRB 6 Error Output SLA 7 Speed Load Angle Output CPN 9 Negative connection of charge pump capacitor CPP 10 Positive connection of charge pump capacitor VCP 11 Charge-pump filter-capacitor CLR 12 Clear = Chip Reset input CSB 13 SPI ch
Contact Image Sensor
AMI Semiconductor™s AMIS-720649 (PI6049A) contact image sensor (CIS) is a 600 dots per inch (dpi) resolution linear image sensor, which employs AMI Semiconductor™s proprietary CMOS image sensing technology. The sensor contains an on-chip output amplifier, power down circuitry and parallel transfer features that are uniquely combined with present-day active-pixel-sensor technology. The image sensors are designed to be cascaded end-to-end on a printed circuit board (PCB) and package
Issue Date: 25 May 2009 Rev.14 Jun 2007 Page 1 of
DESCRIPTION AND PURPOSE: This is the Final PCN located at www.onsemi.com announcing a change in lead frame from bare copper to Palladium Pre-plated leadframe for all the TSSOP48 package types, aligning with the other ON Semi TSSOP family devices. Device performance and reliability have not changed. There will be no changes to package dimensions, functionality, or data sheet specifications. This change will be e ON Semiconductor continually strives for quality assurance and improvement, providing
400dpi CIS Module
The AMIS-710414-A4 (PI414MC-A4-R) is a contact image sensor (CIS) module, which uses MOS image sensor technology for high-speed performance and high sensitivity. The AMIS-710414-A4 is suitable for scanning A4 size (216mm) documents with 15.8 dots per millimeter (dpm) resolution. Applications include fax machines, game systems, a variety of mark readers, and other automation equipment requiring document scanners.
300dpi CIS Two-Level Digital Output Module
The AMIS-710330 (PI330MC-DR) is a contact image sensor (CIS) module with an additional on board circuit, which digitizes the analog pixels from the CIS image sensor to a Å“background-trackingÂ, two-level digital output signal. The module uses MOS image sensor technology to gain high-speed performance and high sensitivity.
200dpi CIS Module
The AMIS-710207-A4 (PI207MC-A4) contact image sensor (CIS) module uses MOS image sensor technology for high-speed performance and high sensitivity. The AMIS-710207-A4 is suitable for scanning A4 size (216mm) documents with 8 dots per millimeter (dpm) resolution. Applications include fax machines, game systems, a variety of mark readers, and other automation equipment requiring document scanners.