AMIC Technology
A29L800A Series 1M X 8 Bit / 512K X 16 Bit CMOS 3
Description The A29L800A is an 8Mbit, 3.0 volt-only Flash memory organized as 1,048,576 bytes of 8 bits or 524,288 words of 16 bits each. The 8 bits of data appear on I/O0 - I/O7; the 16 bits of data appear on I/O0~I/O 15. The A29L800A is offered in 48-ball TFBGA, 44-pin SOP and 48-Pin TSOP packages. This device is designed to be programmed in-system with the standard system 3.0 volt VCC supply. Additional 12.0 volt VPP is not required for in-system write or erase operations. However, the A29L80
A7121 Preliminary 2.4GHz GFSK Transceiver PRELIMI
Description A7121 is a monolithic CMOS integrated circuit for wireless applications in 2.4GHz ISM band. The device is provided a complete GFSK transceiver up to 3Mbps data rate. The chip features a fully programmable frequency synthesizer with integrated VCO circuitry. Features 2400MHz~2484MHz worldwide license free frequency band Up to 79 selectable channels 2.2 V 2.8 V voltage supply Programmable output power up to 0dBm Channel switching time < 200us 1 or 3Mbps high speed data rate -20 C to
A29010 Series 128K X 8 Bit CMOS 5.0 Volt-only, Un
Description The A29010 is a 5.0 volt-only Flash memory organized as 131,072 bytes of 8 bits each. The 128 Kbytes of data are further divided into four sectors for flexible sector erase capability. The 8 bits of data appear on I/O0 - I/O7 while the addresses are input on A0 to A16. The A29010 is offered in 32-pin PLCC, TSOP, and PDIP packages. This device is designed to be programmed in-system with the standard system 5.0 volt VCC supply. Additional 12.0 volt VPP is not required for in-system wri
A29L160A Series 2M X 8 Bit / 1M X 16 Bit CMOS 3.3
Description The A29L160A is a 16Mbit, 3.3 volt-only Flash memory organized as 2,097,152 bytes of 8 bits or 1,048,576 words of 16 bits each. The 8 bits of data appear on I/O0 - I/O7; the 16 bits of data appear on I/O0~I/O 15. The A29L160A is offered in 48-ball FBGA, 44-pin SOP and 48-Pin TSOP packages. This device is designed to be programmed in-system with the standard system 3.3 volt VCC supply. Additional 12.0 volt VPP is not required for in-system write or erase operations. However, the A29L1
A625308A Series 32K X 8 BIT CMOS SRAM (July, 2006
Description The A625308A is a low operating current 262,144-bit static random access memory organized as 32,768 words by 8 bits and operates on a voltage from 4.5V to 5.5V. Inputs and three-state outputs are TTL compatible and allow for direct interfacing with common system bus structures. Minimum standby power is drawn by this device when CE is at a high level, independent of the other input levels. Data retention is guaranteed at a power supply voltage as low as 2.0V. Pin Configurations DIP /
A623308A Series 8K X 8 BIT CMOS SRAM (July, 2006,
Description The A623308A is a low operating current 65,536-bit static random access memory organized as 8,192 words by 8 bits and operates on a voltage from 4.5V to 5.5V. Inputs and three-state outputs are TTL compatible and allow for direct interfacing with common system bus structures. Minimum standby power is drawn by this device when CE is at a high level, independent of the other input levels. Data retention is guaranteed at a power supply voltage as low as 2.0V. Pin Configurations DIP / SO
LP62E16512 -I Series Preliminary 512K X 16 BIT LO
Description The LP62E16512-I is a low operating current 8,388,608-bit static random access memory organized as 524,288 words by 16 bits and operates on low power voltage from 1.65V to 2.2V. It is built using AMIC's high performance CMOS process. Inputs and three-state outputs are TTL compatible and allow for direct interfacing with common system bus structures. Two chip enable input is provided for POWER - DOWN, device enable. Two byte enable inputs and an output enable input are included f
A27630 8A 64K X 8 OTP CMOS EPROM (December, 2001,
Description The A276308A chip is a high-performance 524,288 bit one -time programmable read only memory (OTP EPROM) organized as 64K by 8 bits. The A276308A requires only 5V power supply in normal read mode operation and any input signals are TTL levels. The A276308A is available in industry standard 28 pin dual- in -line and 32 lead PLCC packages. Pin Configurations n DIP n PLCC A276308AL A6 A10 NC I/O 6 CE A15A12 A7A6A5A4A3A2A1A0 I/O 0 I/O 1 I/O 3 I/O 4 I/O 5 A11 A9 A13 VCC A10 A276308A 123456