Super High Dense Cell Design and Reliable and Rugged

APA2030/1 is a monolithic integrated circuit, which provides internal gain control, and a stereo bridged audio power amplifiers capable of producing 2.6W (1.9W) into 3. with less than 10% (1.0%) THD+N. By control the two gain setting pins, Gain0 and Gain1

N-Channel 40V/6.5A, RDS(ON) = 20mW (typ.) @ VGS = 10V RDS(ON) = 28mW (typ.) @ VGS = 4.5V

The APW7058 integrates one synchronous-rectifiedBuck PWM controller and one linear controller to providetwo regulated voltages for graphics cards andother embedded processor applications. The PWMcontroller which drives dual N-channel MOSFETs usesfixed 600kHz frequency, voltage-mode PWM controland integrates power-on-reset(POR), built-in soft-start,output under-voltage monitoring and shutdown functionsinto a single chip. The linear controller whichdrives a N-channel MOSFET bypass transistor allow

Super High Dense Cell Design Reliable and Rugged Lead Free Available (RoHS Compliant)

The APL5915 is a 1.5A ultra low dropout linear regulator. This product is specifically designed to provide well supply volatage for motherboards NB and VGA card applications. The IC needs two supply voltages, a control voltage for the circuitry and a main

The APW7078 is a single PWM, step-up DC-DC controller with low operating voltage application integrating soft-start and short circuit detection function. And the oscillator switching frequency on chip can be operated by terminating OSC pin to connect capa

The APW1175 is a two-phase, synchronous, and voltage mode PWM controller to provide dual channel or single outputs in two distinct operation modes. In independent mode, the two PWM converters supply two independently regulated voltages by converting a common or two different power inputs. In two-phase mode, the two PWM converters supply one regulated voltage with programmable current sharing control by converting a common or two different power inputs. The two-phase mode can supply the larger po

30V/50A, RDS(ON)=7.5mW (typ.) @ VGS=10V RDS(ON)=11mW (typ.) @ VGS=4.5V

The APW7085 is a 2A, asynchronous, step-down converter with integrated 100mW P-channel MOSFET. The device, with current-mode control scheme, can convert 4.75~26V input voltage to the output voltage adjustable from 0.8 to 90% VIN to provide excellent outpu