The EXB100 series of 100 W single output isolated dc-dc converters are specially designed to meet the power needs of low voltage silicon. Housed in an open-frame package with standard footprint, these latest generation converters offer efficiencies as high as 91.5% (typical on 5 V at 20 A). The series comprises three 48 V input models with 5 V, 3.3 V and 1.8 V outputs. All models feature a wide input range, trimmable output voltage and 30 A output (5 V is limited to 20 A). Remote sense and remot

RFB300/350 series is a high efficiency, enclosed, isolated dc-dc converter series in an industry standard half-brick package that provides up to 350 W of output power. The series delivers very high usable output power for today's high performance RF power amplifier and similar applications. The four models in the series feature an input voltage range of 18 Vdc to 36 Vdc and 36 Vdc to 75 Vdc and an output voltage of 12 V and 28 V. The output voltage is adjustable from 7.2 Vdc to 13.2 Vdc or 1

THE SIL15E-12 series are non-isolated DC/DC converters packaged in a singlein- line footprint giving designers a cost effective solution for conversion from a 10V to 14V input to output voltages of 0.8V to 3.63V. The SIL15E-12 offers a wide outputs trim range, which allows maximum design flexibility and a pathway for future upgrades.

The AMD VRM non-isolated dc-dc converter is designed to meet the exceptionally fast transient response requirements of today's microprocessors and fast switching logic in a compact size at an affordable price. Advanced circuit techniques, component selection,placement optimization, and state-of-the-art silicon integration thermal packaging, provide a high power density, highly reliable, and very precise voltage regulation system for advanced microprocessors.

The NFS50 series is a 50W universal input AC/DC power supply on a 6.3 x 3.94 inch card with a maximum component height of 1.5 inches for use in 1U applications. The NFS50 series can regulate on the auxiliary outputs down to no load making it suitable for applications that require a heavy logic load on the main 5V output and low nominal loads with high peak capability for drives, relays or switches on the auxiliary outputs. The NFS50 provides 50W of output power with free air convection cooling w

The SXE15 power module is a DC/DC converter that operates over an input voltage range of 33VDC to 75VDC and provides either one or two isolated regulated DC outputs. The modules have a maximum power rating of 15W and excellent efficiencies are achieved by optimal driving of the synchronous rectification stage.

A block diagram of the both converter is shown in Figure 1. Extremely high efficiency power conversion is achieved through the use of synchronous rectification techniques. The POL topology is a non-isolated three terminal synchronous buck converter. The control of the synchronous rectifiers are optimised for high efficiency power conversion

The DPF1500 is a 1500W universal input AC/DC front end power supply in a fully enclosed hot pluggable case with built-in fan, handle, IEC input connector, on/off switch and DIN output signal connector. Providing a single 57.8V output at full load with a full set of status signals. The DPF1500 is designed for use as a front end in medium power communication applications adopting distributed power architecture. The DPF1500 provides 1500W of output power and is fully compliant with EN61000-3-2. Sta

The PTHxx060Y are a new series of non-isolated dc-dc converters designed specifically for bus termination in DDR and QDR memory applications. Operating from either a 3.3 Vdc, 5 Vdc or 12 Vdc input, the modules generate a VTT output that will source or sink up to 10 A of current to accurately track their VREF input. VTT is the required bus termination supply voltage, and VREF is the reference voltage for the memory and chipset bus receiver comparators. VREF is usually set to half the VDDQ power s

The Quarter-Brick Narrow IBC series is a new high efficiency, isolated, Intermediate Bus Converter that provides up to 300 Watts of output power. The converters in this series are designed to convert 48 Volts ±10% to a loosely regulated 12 Volts with a full load up to 25 A and efficiency up to 96%. The 12 Volt power is a great power source for a variety of non-isolated, point-of-load converters or embedded Solutions.