The SIL10E series are non-isolated DC/DC converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from either a 5V or 3.3V input to output voltages of 3.3V to 0.8V. The SIL10E offers both fixed outputs and wide a output trim range, which allows maximum design flexibility and a pathway for future upgrades. Local voltage conversion by the SIL10E series from existing 5V or 3.3V system voltages eliminates the need for redesign of existing power arch

The NFS42 series is a 40W universal input AC/DC power supply on a 6.3 x 3.9 inch card with a maximum component height of 1.5 inches for use in 1U applications. The NFS42 series is available in three standard models with a lower component count and larger footprint than most standard 40W models to ensure greater reliability. The NFS42 provides 40W of output power with free air convection cooling which can be boosted to 50W with 20CFM of air. Standard features include overvoltage and short circuit

The CVN300 power converter is a single phase AC to DC power supply for applications in entry-level server computer systems, and meets the specifications for the Server Systems Infrastructure (SSI). It features four main output channels, with an auxiliary output. The power supply is internally cooled with a variable speed fan, which can also be utilized for system cooling, with fan control and monitoring signals provided.

A block diagram of both converters is shown in Figure 1. Extremely high efficiency power conversion is achieved through the use of synchronous rectification techniques. The POL topology is a non-isolated three terminal synchronous buck converter. The control of the synchronous rectifiers are optimised for high efficiency power conversion.

The DPF1000 is a 1000W universal input AC/DC front end power supply in a fully enclosed hot pluggable case with built-in fan, handle, IEC input connector, on/off switch and DIN output signal connector. Providing dual 48V and 5V outputs with a full set of status signals. The DPF1000 is designed for use as a front end in medium power communication applications adopting distributed power architecture. The DPF1000 is fully compliant with EN61000-3-2. Standard features include current sharing and ful

This series is a new, high efficiency, Quarter-Brick, isolated, Intermediate Bus Converter series that provides up to 300 Watts of output power. The series is designed to convert 48 Volts ±10% to a loosely regulated 12 Volts at full rated load up to 25 A and efficiencies up to 96%. The 12 Volt power is a great power source for a variety of non-isolated, point-of-load converters or embedded solutions. This converter is available in four package types, standard quarter-brick through-hole, t

The TLP150 medical series offers up to 150 Watts of output power. Its 5" x 3" x 1.25" form-factor makes it suitable for use in low-profile applications. The main output channel is compatible with systems that implement distributed power and point-of-load architectures. It can also be used to power electromechanical devices such as relays, motors and pumps. An optional auxiliary output is also available for those systems that require ‘standby' operation. The low earth leakage

The semi-regulated, wide input Quarter-Brick Intermediate Bus Converter (IBC) model is a new high efficiency, openframe, isolated, 28A converter in an industry standard quarter-brick footprint. This IBC provides designers with an extremely energy-efficient, cost effective solution for main on-board power source in 12VDC distributed power systems. In these systems, the IBC is intended primarily for powering multiple downstream non-isolated point-of-load (POL) converters.

The NFN40 are industry standard 40 Watt power supplies with the capability to supply 50W in a forced air ambient and to automatically operate from any voltage between 85VAC and 264VAC. Use of MOSFET based switching circuits allows for enhanced features such as output regulation down to zero load. Universal input voltage eliminates the need to change jumpers or switch settings to cater for different or widely varying line voltages. In addition to the input voltage range, VDE, UL, CSA, EN60950 and

The AFE1200 power module is a rack mountable single phase AC to DC power supply, designed to be a cost-competitive front-end power supply for distributed power systems. It is particularly suitable for use in data processing, datacom and telecom applications. The outputs are fully floating, enabling users to adopt whatever rail reference configuration they require. The AFE1200 power modules are designed for hot-swap operation and can be mounted into AFS2400/4800 power shelves for redundant-mode o