The SMT15C series is a new high density open-frame, non-isolated converter for space sensitive applications. Each model has a wide input range (4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc) and offers a wide 0.9 Vdc to 5.0 Vdc output voltage range with a 15 A load. An external resistor adjusts the output voltage from its pre-set value of 0.9 V to any value up to the 5 V maximum.Typical efficiencies for the models are 89% for the 5 V input version and 91% for the 12 V input version. The series offe

The EXB50 series of 50 Watt single-output isolated DC/DC converters are specifically designed to meet the power needs of low-voltage silicon. Housed in an open-frame package with an industry-standard footprint, these latest-generation converters offer efficiencies as high as 91%. The series comprises three 24V input models with 5V, 3.3V and 2V outputs, and six 48V input models with 12V, 5V, 3.3V 2.5V, 2.0V and 1.8V outputs. All models feature a wide input range, trimmable output voltage and a 10

The SMT06C is a new high density open frame non-isolated converter series for space sensitive applications. Each model has a wide input range (4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc) and offera wide 0.9 Vdc to 5 Vdc output voltage range with a 6 A load. An external resistor adjusts the output voltage from its pre-set value of 0.9 V to any value up to the 5 V maximum. Typical efficiencies for the models are 89% for the 5 V input version and 91% for the 12 V input version.

The NLP150L series of 150 Watt ac-dc open-frame power supplies are available with single, triple or quad outputs. The quad output versions described in this datasheet are housed in a 3.8 x 7.8 x 1.26 inch package. All NLP150L series power supplies are harmonic current corrected to meet the EN61000-3-2 standard, and support current sharing. The power supplies are designed for use in 1U shelves or boxes, and are primarily intended for networking applications that have a heavy logic content, such

A block diagram of the EXQ60 converter is shown in Extremely high efficiency power conversion is achieved use of synchronous rectification techniques (patents pending).

L-bracket and slotted cover ,Assembly instructions, Mounting screws, Crimpterminals, Mating connectors

The dual input ATC210 bus converter provides AdvancedTCA (ATCA/PICMG3.0) board designers a compact and rugged solution for generating intermediate bus voltages in a footprint-optimized package.

The SIL20C Series is a new high density open frame non-isolated converter for space-sensitive applications. Each model has a wide input range (4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc) and offer a wide 0.9 Vdc to 3.3 Vdc/5 Vdc output voltage range with a 20 A load. An external resistor adjusts the output voltage from its pre-set value of 0.9 Vdc to any value up to the maximum allowed value for that model. Typical efficiencies are 87% for the 5 V input version and 91% for the 12 V input version

The ES Series 15 Watt isolated DC/DC converters feature a wide input voltage range with a ratio 2:1. The input voltage ranges are 9 - 18VDC, 18 - 36VDC and 36 - 72VDC. The ES series provides three different triple output combinations: 5/±12, 5/±15, 5/+12/-5VDC. With output power up to 15 Watts, these units are ideal for applications where input voltage varies considerably and outputs power TTL, CMOS, op-amps or A/D, D/A converters. The ES series is packaged in a PC mountable 2.56 x

The SIL10E series are non-isolated DC/DC converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from either a 5V or 3.3V input to output voltages of 3.3V to 0.8V. The SIL10E offers both fixed outputs and wide a output trim range, which allows maximum design flexibility and a pathway for future upgrades. Local voltage conversion by the SIL10E series from existing 5V or 3.3V system voltages eliminates the need for redesign of existing power arch