Description I 15 fully loaded 20 8456 015 001 169 Faston Solder 15 fully loaded 59 8456 015 000 002 13.0 mm Solder 15 fully loaded 59 8456 015 000 003 Screw 15 fully loaded 20 8456 015 020 169 Solder 4.0mm 15 fully loaded 59 8456 015 000 001 NB: Additional Plating & Loading Variations: Please contact your local AVX sales office or distributor. LOADING DESCRIPTION DIMENSIONS 10.1 (0.398) 90.0 (3.543) 28.6 (1.126) 15 contacts, fully loaded 6.3 x 0.8 20 8456 015 001 169 (0.248 x 0.031) 84.9 +0

Ultracompact, lightweight design,Resistant to damage from impact and vibration,Excellent temperature stability (±0.3%),Low cost,Bulk packaged 500 pieces per bag or 2000 pieces per reel, Sold in increments of 200 pieces.

Weibull graded, Reliability 0.1% / k hrs, Low leakage, Conformance testing (Lot by Lot), Extended traceability, Approved for use in life support and implantable medical devices

DESCRIPTIONThese jigs are designed for testing the CP0402 and CP0603High Directivity Couplers using a Vector Network Analyzer. They consist of a dielectric substrate, having 50 microstripsas conducting lines and a bottom ground plane located at adistance of 0.254mm (0.010") from the microstrips.The substrate used is Neltec s NH9338ST0254C1BC. The connectors are SMA type (female), Johnson ComponentsInc. Product P/N: 142-0701-841.Both a measurement jig and a calibration jig are provided.The c

Description II I 96 a + b + c fully loaded 10 8577 096 001 025 10 8577 096 001 049 64 a + c fully loaded 10 8577 096 001 026 10 8577 096 001 050 32 a + c even loading 10 8577 096 001 033 10 8577 096 001 057 2.9 mm (Y) 32 a loading only 10 8577 096 001 027 10 8577 096 001 051 Straight 46 + 2 fully loaded + ground 10 8577 096 101 025 10 8577 096 101 049 48 a + b + c fully loaded 10 8577 096 002 025 10 8577 096 002 049 32 a + c fully loaded 10 8577 096 002 026 10 8577 096 002 050 16 a + c even load

Microwave MLC, SLC, or Thin-Film capacitor applications in MIC circuits can be grouped into the following categories: DC Block (in series with an MIC transmission line), RF Bypass (in shunt with transmission lines), Source Bypass (in shunt with active device), Impedance Matching This chapter discusses these applications and the performance parameters of microwave capacitors affecting these applications.

The ZZ series is intended for use as a high reliability alternative to a commonly available commercial filter type. Due to its smaller body diameter, capacitance is limited. It does provide effective filtering in the MICROWAVE frequency spectrum from 100 MHz through 26 GHz. Designed to be soldered into a package, bracket or bulkhead (and maintain hermeticity), it is ideal for high impedance circuits where large capacitance values are not practical.

10 TPCBY SeriesGeneral Technical Data* Flame reta SPRAB28

The 8404 series cable cover is an accessory extension to AVX's already large DIN 41612 connector range. The cover is suitable for use with any standard 96 position shell size DIN connector, styles C, R and M. The design of the cover enables the completed assembly to be fitted together without the use of specialized tools. Field service repairs are possible.