DESCRIPTION6DC FILTERINGMedium Power Film CapacitorsFFBCapacitance rangeCn6.2F to 110FTolerance on Cn 10%Rated DC voltageVndc75 to 400 VDielectricpolyesterELECTRICAL CHARACTERISTICSDC FILTERING FOR LOW VOLTAGEHOT SPOT CALCULATIONhot spot= ambient+ (Pd+ Pt) x RthwithP d(Dielectric losses) = Q x tg0Q x tg0 [ 12x Cnx (Vpeak topeak )2x f ] x tg0(see tg 0 for polyester dielectric page 3)Pt(Thermal losses) = Rsx (Irms )2whereC nin FaradIrmsin Amperefin HertzVin VoltRsin Ohmin CR thin C/W7DC FILTERINGD

Non-inductive, self-healing, metallized polyester film capacitor. Insulated* thermoplastic casing, epoxy resin sealed with stand-offs*. Radial connections.

The BestCapTM series of electromechanical supercapacitors offer excellent high power pulsing characteristics, based on the combination of high capacitance and ultra-low ESR. Based on unique aqueous chemistry (RHISS - rechargeable hydrogen ion solid state), the polymer electrolyte system is capable of ultrathin construction, down to 0.7mm. It is also environmentally friendly as it contains no liquids or hazardous chemicals.

95 signal contacts and 38 ground shield contacts in 5+2 rows of 19 positions, Designed for gas tight press-fit installation, Fills position P3 of the CompactPCI specification, Twelve different contact styles are available for customizing, connector to exact specifications see page 65, See page 50 for rear shroud part numbers.

Efficient system for high current distribution in backplane applications, Press-in element for power connection for P.C. boards, VARIPIN™ press-fit design, 30A current rating, Several different connection versions available, Suitable for circuit boards with .063 (1.6mm) minimum thickness, Plating SnPb over Ni.

Miniture (2.0x1.0mm) Resistor Arrays Max 60% space saving compared with the use of standard chip array (3.2x1.6mm), 0.5mm Termination pitch (Same as IC leadpin pitch) Easy designing of pattern layout and improve electrical characteristics for curcuit, ?Please consult combination of different resistance type.

Varilok® connectors can be specified as either fully loaded, to include the connector body and a variety of pre-loaded contact termination types or the empty body and a selection of separately specified and ordered contacts. The table below details the various loose contacts available.

Number of Contacts - 5-32, 2000 Connectors per Tape & Reel, Voltage - 50V, Current Rating - 0.4 amp max DielectricWithstanding Voltage -200V RMS min, Operating Temperature -(-20°C - +85°C)

This should be read in conjunction with the Product Datasheet. Failure to observe the ratings and the information on this sheet may result in a safety hazard.

The series uses a dry-wound (non-oil-filled) segmented metallized polypropylene or polyester dielectric, which features the controlled self-healing process, specially treated to have a very high dielectric strength in operating conditions up to 85°C.