Current URL: |
AZ Displays
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY
Description 1 I CS1 Chip select signal. Active when low 2 I /RES Chip reset signal. Active when low 3 I A0 It decide wh
PA035XSJ TECHNICAL SPECIFICATION
Compatible with NTSC & PAL system, . Pixel in delta configuration, Image Reversion : Up/Down and Left/Right.
PM070WT3 TECHNICAL SPECIFICATION
Wide VGA (800*480 pixels) resolution, Amorphous silicon TFT LCD panel with LED back-light unit, Pixel in stripe configuration, Thin and light weight, Display Colors 262, 144 colors.
ACM1002A Series
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: ACM1002A Series REVISED: MARCH 14, 2006 General Specification Table 1 Item Standard Value Unit ¡õDot-Gra phic ¡öCharacter ¡õDigits Character Format Dots ¡õ ¡ö ICON with Module Dimension 38.0(W) *25.5(H) *1.8(T) mm Viewing Area 34.0(W) * 14.0(H) mm Dot Size 0.5(W) *0.75(H) mm Dot Pitch 0.55(W) * 0.8(H) mm Character Size 2.7(W) * 5.55(H) Character Pitch 3.2(W) * 6.25(H) Driving 1/18d
ACM 2004E SERIES LCD MODULE
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: ACM 2004E SERIES DATE: April 24, 2002 ACM2004E SERIES LCD MODULE 1.0 MECHANICAL SPECS 1. Overall Module Size 182.0mm(W) x 90.0mm(H) x max 13.0mm(D) for LED backlight version 182.0mm(W) x 90.0mm(H) x max 9.50mm(D) for reflective version 2. Dot Size 1.10mm(W) x 1.50mm(H) 3. Dot Pitch 1.20mm(W) x 1.60mm(H) 4. Duty 1/16 5. Controller IC ST7066 6. LC Fluid TN, STN 7. Polarizer Reflective, Transflective, Transmissive 8. Viewing Angle Bottom, Top 9
AGM1264N SERIES
Drive Method: 1/65 Duty, 1/9 Bias, The Module Operating Voltage: 3V, The LCD Operating Voltage : 9.0V, Viewing Direction: 12:00, Operating Temperature: 0 ~50, Storage Temperature: -20 ~70, Display type: STN or FSTN / Positive or Negative.
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY
Description 1 I CS1 Chip select signal. Active when low 2 I /RES Chip reset signal. Active when low 3 I A0 It decide whether the data bits are data or a command. "L" is for command and "H" is for data. 4 I /WR Write signal. Active when low 5 I /RD Read signal. Active when low 6~13 I/O D0~D7 8-bit directional data bus 14 I VDD Power supply
SPECIFICATIONS FOR STANDARD RESISITIVE TOUCH PANEL
Superior quality standard 4 wire resistive analog touch panel, Excellent specification and high quality, Anti Newton ring technology,High reliability materials, Pen/finger type, Transparency - 80%.
PM070WT4 TECHNICAL SPECIFICATION
Wide VGA (800*480 pixels) resolution, Amorphous silicon TFT LCD panel with back-light unit, Pixel in stripe configuration, Thin and light weight, Display Colors?262,144 colors, +3.3V DC supply voltage for TFT LCD panel driving, Wide viewing angle, TTL interface, Module with resistive type touch panel, Backlight driving DC/AC inverter not included in this module.